Welcome to the A10 Networks Community! For any questions or concerns, please reach out to our admins.
ADC - Application Delivery
Communicate with A10 customers and engineers about load balancing with A10 Networks' Thunder® Application Delivery Controller (ADC).
Discussion List
- Hi, When I'm using the real proxy servers, it successfully connects to o365 (web) and some other sites, while when im using the virtual server witch has the nodes of the proxy servers, it wont connect…
- Hi. We have SLB Virtual Service with type TCP-Proxy and we've also enabled Insert Client IP option in TCP-Proxy template but all traffic is forwarded from AX1030 internal IP .The question is how we ca…
- Hello, I have a problem with my VRRP-a configuration. Everything works fine, I dont have problem with the service but when I login into the ADC I see the VRRP-a status as unknown. Here's some troubles…
- Posted by dbanares Hi, I would like to ask an example configuration for disaster recovery deployment. What are the options to select in the GSLB algorithm for this kind of deployment. I can't find thi…
- Hello, I have the following JSESSIONID aflex ready and applied to manage the JSESSIONID which is provided by the 2 servers. AFLEX SCRIPT:when HTTP_REQUEST {# Check if JSESSIONID existsif { [HTTP::cook…
- Is it possible to configure vrfs in A10 thunders? If so, could you please provide example
- Is there a way to ensure you can keep this information in the header for ADFS HTTP requests? It seems to be stripped out of the connection requests I was told via a TCP template for proxy header? Spec…
- Hi all. We have experiencing issues with the VIP with cookie persistence. Actual config: port 80 http no def-selection-if-pref-failed template http aaurl_switch template persist cookie Template_PERSIS…
- Hi, I'm hoping someone can direct me to a guide or blog that can help me setup a reverse proxy instance for our on-prem Skype for Business setup. I found an older guide for the AX series, but it's for…
- Hello, I'm a member of the Prometheus[0] monitoring project. We provide support for monitoring a wide variety of systems. In order to support monitoring of devices that support SNMP, we have to create…
- Hello all, Is it possible to run GSLb between two different HW? and two different ACOS ?
- Hi All, Im looking for a way to optimize an application that's on internet by having a local ADC to "intercept" the traffics from client , probably through client amending their host FQDN file pointin…
- Hi - This is probably a stupid question, but I have a configuration of master > slave for our GSLB configuration. We do both GSLB and SLB on each device (different datacenters) as most people do. We d…
- Hi - Old F5 customer here making the switch over to A10 and I am finding either GSLB does not behave as I am accustomed to or I don't know what I am doing. Probably the latter. I have set up GSLB usin…
- What is the significance of the GSLB service port? I have set up my service IP ports to match my SLB configuration. I understand that service IP ports are in place because they can be used for health …
- Hi all, I'm trying to do Rewrite with an HTTP template but I can't understand how it works. I configured correctly the template to balance on the service group inside the app swithcing part but I also…
- Hi Everyone, Actually i have a doubt about what that's exactly means the following entry on my ACOS system: Dec 07 2017 14:26:28 Warning [ACOS] Obtaining Address/Port from NAT Pool Nat-137 failed due …
- Hi all, I've begun to use the axapi. Here's the question: First, I got the authentification token. Then I'm seeking the virtual servers inforation. curl -k GET https://1...7/axapi/v3/slb/virtual-serve…
- Hello, we use A10 Thunder for SSL Inspection as Explicit Proxy. If the users use Internet Explorer or FireFox and they are browse http content which normaly gets redirect to https like http://www.goog…