-
Same mac-address for each vip on same partition
Is it possible to use the same mac address for each vip on the same partiton as the routed ve interface has ?
-
Display all VIPS associated for a particular server .
I want to know for a particular server lets say 2.2.2.2 on what vips this server is used whats the CLI command or GUI ?
-
HTTPS between ADC and Real Server
Hello, I need some help to configure HTTPS comunication between the ADC and the real servers. I have this scenario: Virtual server: X Virtual Services: 80 redirect to 443 URLS: example1.com example2.com I have an aFlex whose send the request HTTP to some services groups. The LB criteria is the path behind the URLs.…
-
Query on authorization based on Private Partition
Hi, We are trying to configure authorization based on Private Partition through external radius server. how can we allow access to multiple partition for an admin user? can you provide a sample config (radius)? Thanks & Regards, Nimal
-
server and vserver stats - how to use
Hey All, I see: extended-stats Enable extended statistics on real server stats-data-enable Enable statistical data collection for real server is available for both servers and virtual-servers. What are they, what additional information is available, how are they used/obtained cli, webUI, AXAPI or other? Are there any…
-
HTTPS on the backend
Dear all, I know that what I'm going to ask is not technically clean or correct, but I want to know if the possibilty exists. At the moment I have a vThunder version 2.7.2-P10 who is doing SSL offload for my applications and balance on the backend over different HTTP ports. Suppose that instead of HTTP I need to balance on…
-
SNMP OID for system platform interface drops in vThunder
Hi Folks, Recently there are few packets drops in my network and found there are system platform interface TX drops. Are there any SNMP OIDs for monitoring those interfaces' errors and drops?, if not are there any other way to monitor those? Active[CGNAT]#show system platform interface-stats /proc/a10/aten_stats_10g:…
-
GSLB Policy - internal VIP, keep folks local
Here's what our server folks are asking me ... We will have 2 internal access only VIPs in each of 3 sites: mail.example.com and autodiscover.example.com. The VIPs are for internal user access to OWA (2016 Exchange). A10 has a nice doc on setting up a single site for Exchange 2016. We will have 3 sites with a couple…
-
Mirror Decrypted Web Traffic
Does anyone know of a way to mirror or replicate decrypted web server traffic to a monitoring server or sensor? Scenario: A10 ADC is acting as a reverse-proxy for a farm of web servers. Client-side traffic is encrypted via TLS from client to A10 VIP. Server-side traffic is also encrypted via TLS from A10 to the web servers…
-
DUO Dag servers behind A10 Thunders
Anyone out there have any experience configuring DUO Dag HA environment behind A10 Thunders? I have some questions regarding the SSL client/server certs, SSL offload, and the health monitors.
-
A10 AXv Thunder 4.0.1 Disk Space issue
Hi there, Currently have an instance of A10 AXv Thunder 4.0.1. Issue I have is that I am unable to increase the disk space within the the software. I have increase the disk in VMWare and the console shows the new 'total' disk space but free space stays the same, appliances keeps showing error 'Ramdisk is mounted READ ONLY'…
-
A10 package for integration with Cisco ACI
Hi all, As I learned from A10 website, A10 can be integrated and automatically provisioned layer 4-7 network services within Cisco Application Centric Infrastructure (ACI) fabric. Could you please let me know when A10 will deliver software package to do that integration?
-
RDS 2016 Guide
Hi, I'm building a test microsoft RDS 2016 environment to eventually replace our old 2008 terminal server. I've followed several guides & have gotten it working, but now I'm trying to add it to our AX1030 & failing miserably. There's an existing deployment guide for 2008 terminal server, but nothing newer. Since those…
-
Fast doubt - show session virtual-server
Dears, How can we identify in the "show session virtual-server" which lines are the half-open tcp connection and tcp established? Regards, Régis
-
A10 hardware
Hello Knowing that the preprod case is a TH 840 CFW and that of the production is a TH 5440 CFW ,Can you confirm that in terms of configuration, OS update and patch application, we will have the same behavior between these 2 models? Thank you
-
External program debugging
Hi I am new to Thunder and networks are not my day job. I have been asked to help out creating an external program health check to do an application level health check. I sort of have the basics working but it is not sending any data to the actual servers on the specified port. I note that in the docs that I have…
-
Automatically disable Service IP based on Health Mointor
Hi, Is it possible to automatically disable a Service IP based on a Health check failure? I've assigned a health monitor (external ping) to a Service IP in GSLB but even if the health monitor fails its check the Service IP would not disabled. Thanks
-
How can I configure GSLB active/active for 2 sites ?
Hi All, I'm a newbie with A10 product. I'm facing with problem is: I have 2 sites was configured in GSLB and there are in GSLB Group for GSLB controler redundancy. Now, only one site have primary controller response for DNS and another is not response. In this situation, I want to both sites will response for DNS request…
-
Logging URL redirection
I need to log the requests to some URLs that are redirected to another domain. I need to know if there's still clients trying to access the OLD domain. I wrote an aFLEX to do this, and it works ok in my lab enviroment. I did the same configuration at the production network, but it doesn't work. There's not traffic matching…
-
Secure delete A10 HD and compact flash
Hi there, I've been reading but I can't find a definitive answer to a couple of questions. I need to securely delete our older A10 platforms and I'm trying to figure out a way to do this. I've looked into the 'reset' user. It appears to remove the configuration, but does it remove it from all bootimage areas? I.e. primary…
-
Real server through a default GW
Hi community I'm new in a10 knowledge and I want to ask your help with a doubt I can't reach a real server, when I apply a test and a debug I can see that no traffic is sending to that server IP. That server is not in the same LAN segment I can ping that server and reach it through my default gw that is a Checkpoint FW I…
-
Vmotion with vrrp-a heartbeats best practice
I'm not seeing (or finding) any documents out there that speak to best practices with VMware 's vmotion of a vThunder ADC when vrrp-a is operational. Understanding that during a vmotion event the VM is stunned momentarily and likely little to no IO for a short period of time. It would seem to me then that any heartbeat…
-
Virtual Server One port hearing and Multiple port Balance
Hi community I want to know if it is possible to balance between two different real servers that use ten different ports each of them. This using only One Virtual Server hearing in only one port This is a configuration example what I'm talking: slb server DNS1_SERVER 100.18.1.200 health-check-disable port 80 tcp…
-
Load balancing service with SSO Authentication
HI, i'm working in a new SLB service for an application with 2/3 servers. I'll try to explain the scenario: I would like to deploy a new VIP for load balancing of an application JAVA based (JBOSS Servers), for this we have to apply JSESSION ID persistence in the VIP with and aflex:…
-
Proxy Protocol headers
I know A10 doesn't support proxy protocol headers out-of-the-box but I was thinking would it be possible to do this using scripting? Meaning is it possible to alter http request so that proxy protocol headers are inserted before http method like this PROXY TCP4 192.168.0.1 192.168.0.11 56324 443\r\nGET / HTTP/1.1\r\nHost:…
-
Cannot connect to O365 via virtual server
Hi, When I'm using the real proxy servers, it successfully connects to o365 (web) and some other sites, while when im using the virtual server witch has the nodes of the proxy servers, it wont connect to 0365 and other sites. Is there a way on how to check this problem? TIA.
-
Redirect to other url
Can we redirect to external url when all real servers failed health check.
-
TCP-proxy Client-IP
Hi. We have SLB Virtual Service with type TCP-Proxy and we've also enabled Insert Client IP option in TCP-Proxy template but all traffic is forwarded from AX1030 internal IP .The question is how we can get source client IP ?
-
VCS avec VRRP-a shows unknown status
Hello, I have a problem with my VRRP-a configuration. Everything works fine, I dont have problem with the service but when I login into the ADC I see the VRRP-a status as unknown. Here's some troubleshooting I have done: AX-vMaster[1/1]#sh vcs summary VCS Chassis: VCS Enabled: Yes Chassis ID: 1 Floating IP: 10.20.10.102…
-
Disaster Recovery configuration example for GSLB
Posted by dbanares Hi, I would like to ask an example configuration for disaster recovery deployment. What are the options to select in the GSLB algorithm for this kind of deployment. I can't find this topic in the manual. Thanks, Dannel
