Recent Activity

cpatel earned the Third Anniversary badge.

Thanks for sticking with us for 3 years.

December 17

luis_f_ribeiro earned the First Comment badge.

Commenting is the best way to get involved. Jump in the fray!

December 10

luis_f_ribeiro

ADC virtual-server BGP RHI

Hi, I'm trying to do RHI with BGP.

I configure BGP, with peer to a router, to redistribute flagged VIP. In the virtual server I do "redistribute vip". At the router I receive the route to the VIP. If the VIP is down I still reveive the route.

I expected to do not receive the VIP route if the virtual-server is down.

So my question:

How can I do the advertise of the VIP route only when the virtual-server is UP - RHI ?
How can I see the BGP routing table at A10? When I do "sh ip route bgp" I do not see any thing.

I'm using "Advanced Core OS (ACOS) version 4.1.0-P9, build 60" vThuner.

Thank you.

Luis.

A10 config.

active-partition BGP
!
!
vlan 100
tagged ethernet 1
router-interface ve 100
name CLI-SIDE
!
vlan 120
tagged ethernet 2
router-interface ve 120
name SERVER-SIDE
!
interface ve 100
name CLI-SIDE
ip address 10.1.3.100 255.255.255.0
!
interface ve 120
name SERVER-SIDE
ip address 10.1.2.100 255.255.255.0
!
!
health monitor TCP_22
method tcp port 22
!
slb server SRV10 10.1.2.10
disable
port 22 tcp
!
slb server SRV11 10.1.2.11
port 22 tcp
!
slb service-group SRV tcp
health-check TCP_22
member SRV10 22
member SRV11 22
!
slb virtual-server VIP 10.1.4.100
redistribution-flagged
port 22 tcp
service-group SRV
!
router bgp 14100
neighbor 10.1.3.1 remote-as 13100
redistribute connected
redistribute vip only-flagged
!
end