Hello everyone, since we're seeing weird timeouts to external services with any of the more recent versions greater than 5.2.1-p2, support suggested to set up some sort of debug environment for them to check. Is it possible to route traffic from physical servers via a virtual ethernet interface on the inactive machine…
Hi everyone, I have a new challenge and it is the following I have a CGNAT solution already implemented in datacenter #1 but they bought another appliance and they are going to put it in datacenter #2 which is several kilometers away. So I was assigned the task of configuring the VRRP-A solution between the two appliances…
We have been seeing an issue with one part of vThunders running vCS & VRRP. Running 4.1.1-P11, build 47 which is the same version we have used in other deployments (20+). We constantly get missed heartbeat messages and then eventually, we get into a dual active situation and then lose BGP. It takes a few minutes for them…
Hi everyone: We have a problem with our Thunder 930 cluster (two A10 Thunder 930 in a L3V scenario with VRRP-A and VCS). There are some partitions created on the cluster and we are seeing a strange behaviour when we change the priority of VRRP-A in any of this partitions. When we decrease the priority of VRRP-A on an…
Hey, Seems simple but I'm not finding anything in the docs or postings. How do you show the floating-ip in a vrrp-a config without showing the running config for the vrrp-a section, which requires a privileged user? Likewise for object-group, how can that be shown without the running config for object-group section? I…
Hello, I have a problem with my VRRP-a configuration. Everything works fine, I dont have problem with the service but when I login into the ADC I see the VRRP-a status as unknown. Here's some troubleshooting I have done: AX-vMaster[1/1]#sh vcs summary VCS Chassis: VCS Enabled: Yes Chassis ID: 1 Floating IP: 10.20.10.102…
Hi, My company has two AX 2500 (2.7.1-GR1) forming an aVCS cluster. The boxes are in the same building right now and we want to move one box to another DC. Both sites are connected via L2 service and latency is low. The interface election protocol runs on the management interface for aVCS. We want to keep the benefits of…
Hi All I have been configured VRRP-A on the 4.0.x. What does the following log mean? Something wrong for configuring VRRP? Please advice. Nov 24 2015 18:30:50 Warning [HA]:VRRP-A device 1 partition 0 vrid 13 has different failover policy settings: failover policy used: 1 VRRP conifguration is; DEVICE#1 vrrp-a common…
Hi all, I have a pair of 3030s running 4.01 that I am setting up in an aVCS VRRP-a pair that will replace a couple of Cisco CSS devices. One question I do have is on the CSS pair I track an upstream external router with an ICMP ping to check if it is 'Alive' if it fails to respond then it forces a failover in the pair so…