-
GSLB Gateway transparent Health monitor validation
Hello How can I configure the A10 to validate the GSLB gateway using a Health check with transparent to 8.8.8.8? for example, like we do in slb server because by default GSLB gateway validation is an ICMP to the gateway IP but if the gateway is UP but does not have access to the Internet the A10 will not know so it will…
-
"msg": "Could not create health monitor -> Reach max account limitation”.
While adding addition health monitors on our exsisting TH1080 A10 boxes we are getting below error "msg": "Could not create health monitor -> Reach max account limitation”. Is it something related to resoures for health monitors reached maximum ?
-
vThunders setup Health check for 443
Hello, Just getting my feet wet with this as we have few sets of A10 vThunders on 4.1.4-GR1-P6 Build 90 and looking to setup a Health check so that if 443 is not responsive that A10 knows to pass traffic to the other server and not the one that is down on 443. I created a Health Monitor for port 443 HTTPS and have defaults…
-
SNAT from Health Monitor
Hello First time posting here and new to A10..... hopefully I'm within guidelines :-) I'm currently trialing the 4.1.4 P10 software in our lab and can't get the real servers to come up. The reason is, the real servers are UAT servers in the prod network but the ADC is in our lab, where the IP's are not routable from prod.…
-
Health check did not work in GSLB
I have three ISP line,ISP1,ISP2 and ISP3. We check the ISP's health status with ICMP protocol,when ISP1 down,how to know the status?When ISP1 down,If the health check monitor go out through ISP2 or ISP3?So A10 can't know the ISP1 down.The health check monitor did not work.
-
Health Monitor and Expect Text
Good afternoon everyone, I am attempting to perform a health check on an application server that returns a long nested string. This is more than a 200 or even a Success! on a health monitor page but something more along the lines of the below.…
-
NHLD health monitor config examples ?
Hi, I have a scenario where a non-AS customer has contracted Internet connectivity with 3 ISPs and is doing NHLD. What would be some commonly-used health monitors to determine which ISP link is up or down? I've used DNS queries using Internet DNS servers with static routes to each DNS server going through a specific ISP,…
-
External program debugging
Hi I am new to Thunder and networks are not my day job. I have been asked to help out creating an external program health check to do an application level health check. I sort of have the basics working but it is not sending any data to the actual servers on the specified port. I note that in the docs that I have…
-
How to perform server and port health monitors in transparent mode
I am setting up new A10s configured in transparent mode. There are many VLANs in use and eth1 connects up to the firewalls, and eth2 connects down to the switches. Both ports configured as trunks. I use a customer partition, so on the entire device the only IP addresses in use are the mgmt0 interface, and a dedicated vlan…
-
External Health monitor - check SNMP info from servers
Hello, I´m having the following requierement: Need to get the snmp information of the servers I´m load balancing, and when the CPU and MEMORY pass over 90%, put this server on maintenance mode, so won´t receives new clients, but still maintains the connection for currents clients. Then, after the CPU and memory decreases…
