-
Hosting and automating web content on A10 ADC
I'm looking to host a proxy PAC file internally. All changes to our PAC file are currently made via Git commits and then a member of our security team copies it over to a Web Server. This web server is very basic and does not support automation or the like. As such, we are looking at web hosting solutions that can be…
-
Fast Aging and Memory Usage
I recently upgraded a Thunder 1040 from 4.1.4 to 6.0.3. We use it for CGN. Afterwards we got a few complaints about VPN, SIP, and gaming losing connection. One complaint specifically mentioned the issue occurring every 15 minutes. Logs show "Fast aging is enabled, memory constraint is reached" about every 15 minutes. I…
-
NTP sync in Harmony Controller
Hi community, How could I sync the NTP in the Harmony Controller with an A10 device?
-
Change mgmt ip in Harmony Controller
Howdy community, I have a cluster of A10 devices working with CGNAT, and also a Harmony Controller installed. I have changed the management ip in some A10 devices. My question is: how can I change the managements IPs in the Harmony Controller?
-
Virtual Server UP/Down check via API
Hi all, I want to know is it possible to check if the slb virtual server is up or down via API ?
-
Internet Access
Hello Does anyone know where I can request internet permission for the a10 network balancers and validate access?
-
Remote connection by domains, IPs and URLs of A10
Hi. How to achieve a remote connection through domains, IP's and URLs that have been provided to us for a few days, we managed to install a Thunder 1040 and the client requires this information. You need to know the IP address of the harmony controller to be able to establish a remote connection and start its…
-
A10 network updates
Hi. Does anyone know where I can see what are all the public IPs and domains that the appliance seeks to connect for ACOS updates?
-
Harmony Controller
hi. How can I configure the A10 Harmony Controller from CLI or Web, have its IP address to connect it to the Internet
-
A10 Thunder
Hello! Where can I find CIS level documents for A10 Thunder 1040 or similar to do the hardening.
-
2 Active Link and 1 Backup Link
Hi All, I have three ISP links. I want to configure 2 active links and 1 backup link (active when 2 primary links are down). I can configure a10 for 2 ISP links but the backup link doesn't have any idea. Could you please share a sample configuration for my problem? Thank you.
-
ACME SSL certificate rotation not updated on HTTPS port
I'm on ACOS 5.2.1-P6 using A10 ACME client to generate SSL cert/key pairs. No problem obtaining the files and applying these to templates. I then tested rotation using the "force" option. The new certificate was created and shows as "bound". However, the HTTPS port with associated client-ssl template is still using the old…
-
Secure Renegotiation IS NOT supported
Hi falks, May I know if a10 is supported for secure renegotiation and how to enable it?
-
Hi Team,
May I know mtls support by a10 thunder adc?
-
A10 vThunder ADC/SLB - Redirection based on URL
Hello, I will try to do more research to see if this was already covered in another post, but so far haven't been able to find exactly what I'm looking for. Is it possible to do a redirect based on which URL the end user goes to for whats described below? Or is this completely wrong and I should be looking for an…
-
GitHub Documentation
Is anyone aware of a location where the documentation for the GitHub acos-client can be found? There is an example to create a SLB but that is it. I am looking for documentation to leverage the scripts to build a one-time base configuration on the Thunder from scratch: ie: Hostname, LLDP, NTP, time zone, sync/mirror port,…
-
I have some doubts about the A10 GSLB configuration,
Good day,dear all. We encountered some difficulties in configuring GSLB.Some configurations are as follows: gslb zone sgss.com.cn policy policy-test service 80 www policy policy-test dns-a-record www-ctc static admin-ip 100 dns-a-record www-ctcv6 static admin-ip 100 dns-a-record www-cuc static admin-ip 100 service 80 sso…
-
Persistence issue with aflex
Hi, I have a very simple script handling redirection to an outage server if my primary servers aren't available (see below). I have however got an issue that when persistence is applied (source-ip or cookie persistence), users are being persisted to the outage pool even after the primary service group is back online. Is…
-
Need help to config DNS static entry on GSLB.
From the ADC datasheet ACOS ADC support DNS RPZ (response policy zone). We have a10 thunder boxes acting as GSLB controller/device and would like to move few thousands static dns entries from the old dns server to A10. For now each static entry is a GSLB service-ip with health-check disable, attach to a site name PRIVATE…
-
[T&C] Use Postman for A10 aXAPI calls
Postman is well known test tool and very convenient when it comes to executing APIs. It provides not only variety of API functionality including authentication, setting headers, customizing the payload, but also collaboration functionality for the teams dealing with API projects. This article explains how you can use…
-
Problem with ip nat pool configuration not deletable
Hi Everyone We have a problem with our TH1030S cluster(two TH1030S, VRRP-A and VCS). Advanced Core OS (ACOS) version 4.1.4-GR1, build 78 . I can't erase the following ip nat pool configuration. ip nat pool 172.17.12.0 172.17.12.11 172.17.12.30 netmask /24 ``` #no ip nat pool 172.17.12.0 NAT pool is in use. Try again after…
-
What is solution of A10 for API?
Hi everyone, Our customer have a web service system communicate with mobile app via API (RESTful API protocol). Now they want to a solution of A10 to support and protect this API. I have informed that is aXAPI, right? Please give me some advice about this issues Thanks
-
TACACS with Cisco ISE
I have been trying to set up TACACS authentication via Cisco ISE on an A10 ADC, but haven't been able to find much for configuration documentation, options and examples. Does anyone have any of these? Or know where I could find them? Any assistance would be greatly appreciated. Thanks
-
Factory reset SSLi
Anyway to Factory reset A10 SSLi hardware. I tried creating new APP template, but it's giving error VLAN 850 already used for management services.
-
A10 + Horizon + Azure MFA
Anyone know if there is a setting on the A10 Load Balancer that I can enable/disable that would cause my Azure MFA to connect to my Horizon Desktop the first time but every other time after that it hangs unless I clear my browsing data? If I bypass the LB it works every time. Microsoft said that it may be adding some extra…
-
Radius LB DSR Mode
Hi Experts, Do you have a technical reference for load balancing Radius Server in DSR mode? The traffic flow will be something like this(see attached image). I am not really sure if this is the right behavior so I am asking if you can share some good references with regards to this deployment. Thank you.
-
DS-Lite, CGNAT and Gaming Consoles
We do still have customers that cannot use their consoles. Primarily playstations but also others like x-boxes, with an DS-Lite / CGNAT connection that we provide as ISP. SInce we do not know a better soltution we migrate them back to dual-stack. Anyone here who knows these issues and maybe even a solution. We do use…
-
A10 Thunder URL match statistics
Hello, is there a way to have the match statistics for a URL? I will like to have the number of time a site is visited. I have this in real time and I have the logs, but going through the logs each time is too long and the real time information doesn't help. Any clue? Thanks in advance!
