-
Disk Image Is Malformed
Has anyone faced this problem so far? Аfter I log in, after a while the TPS Detector shows me this error.
-
Reporting problem
Can someone help me with this problem? Failed to push zone Vlada_vremen_1 configuration on devices. Error: Failed to configure zone on detector group: Failed to configure Zone Vlada_vremen_1 on detector: Number of reports enabled is above limit, must configure "reporting-disabled".
-
aGalaxy DDoS Protection
I'm currently encountering an issue with Galaxy NetFlow where I'm unable to view the netflow data, despite having checked and confirmed that the configuration is correct. Could someone kindly assist me with troubleshooting this matter? Any help would be greatly appreciated. Thank you!
-
Version/Upgrade/Backup
Hello everyone, I'm unsure how to access the most recent version of the solution; currently, I'm on version 5.0.6.94. Could someone please clarify which version is the latest? Additionally, I'd appreciate guidance on upgrading to the latest version and backing up data on aGalaxy DDoS protection. Thank you!
-
login issue
Hello, I recently purchased used A10 6430 antiddos ,I plugged it in and powered it on, and used a console cable to login to it. after a moment it shows me "localhost login:" I tried (admin,reset,install,a10....etc) almost everything but to no avail anyone can help me with that ?
-
What should be the format of class list for IPv4 and FQDNs
I've have been trying to create class lists for IPv4 and FQDNs by importing files hosted on a separate web server. What should be the format of the data in the files? I tried the following but keep getting the error "invalid format at line 1". Is the format below correct for FQDNs What should be the format for IPv4? str…
-
TPS deployment with VLANS
Hi everyone, I’m trying a new implementation for a TPS appliance The architecture is the following, there is going to be two internet connections directly to the TPS appliance then the TPS will make Vlan Tagging the traffic and send it to the Switch Core that will forward that traffic to the Firewall by the trunk…
-
Import_file_certificate_pfx format fail
Dear all We have a service running ssl ( client). I have import certificate .pfx format to A10 Please help me Thanks for support Hoang Hung
-
Difference in UDP-Other and ANY-UDP for TPS Services
Hi team Can you, please tell me to understand the main difference between the services Protocol: UDP; Port/Protocol Num: Other and Any-UDP (the same for TCP) in TPS Solution? In the below image from the Galaxy I can choose the two options, but I'm not sure what is the main difference: Thanks
-
IPv6 tools
I am facing an client how wants view how TPS works against DDoS attacks. I know tools to emulate attacks for IPv4, but I do not know tools to emulate the same for IPv6. Where can I find a guidelines to make the tests? Regards,
-
TPS Escalation Levels
Hi team I have some doubts related to TPS escalation levels: if I have configured 5 levels (0-4 )of mitigation. Is it possible to escale immediatly from level 0 to level 4 when a ddos attack is detected instead of pass for each level, even if each zone has its own set of mitigation techniques and policies? And there is a…
-
TCP authentication and SYN cookie?
Hi, Can anyone explain what is the SYN cookie and how we can use? Thanks,
-
axAPIv3 TPS DDoS Dst Entry tutorial?
Hi all, I'm working with axAPIv3 and PowerShell. I just recently wrote some functions to invoke API calls and I'm having a hard time wrapping my head around creating a 'ddos dst entry' and/or 'ddos dst zone' configuration. In the axAPIv3 Documentation for 'ddos dst entry', it provides a schema which has a ton of…
-
agalaxy
Hello. I am new with agalaxy, today in the TPS I saw the following message: Error [DDET]:zone=port_443 port=443 protocol=HTTPS level=1 event-type=DDOS_ZONE_ESCALATION Error Response Status: Notification failed. Please help me. Best regards. Mario Perez
