-
A10 requirement
can you please advice us below features are supported on A10 ? Replacing Peplink 380 LB - Concurrent sessions supports up to 50K - User browsing with load balancing and HA to support minimum 3 ISP links - To function a inbound dns load balancing, All the records of the domain will be hold on the A10 (A, MX, CNAME, TXT,…
-
AX2600 Admin password reset
I bought an A10 AX2600 load balancer off ebay recently to setup a vcs cluster with the existing one I already had but having issues resetting the password to default. I do have a decent amount of experience configuring these out of the box as a previous company I worked for was buying the AX3030's and I setup at least 5-6…
-
Graphing Virtual Server In/Out Throughput
Anyone able to graph the individual virtual server throughput using the accompany MIBs, either in ganglia or cacti?
-
Using a FQDN for a Server
Running into something here that I'm not sure if it is a bug or not. We're basically trying to use our Load Balancer to proxy to something out on the Internet. We have a VIP set up and the server is set to use the of the cloud service. For some reason, the Service Group stats don't show any up or down servers even though…
-
Interfaces showing as blocked in aVCS with VRRP-a Active/Active
I've got two ACOS devices and they're configured in aVCS with VRRP-a with several VRIDs. One VRID is assigned to one of the devices and the other is assigned to the second which should mean it acts as an Active/Active system. I was having some difficulty with OSPF and I noticed when changing the device context to unit 2 on…
-
active connection count
Hi, I'm still a newbie at this & new to this forum. We have 2 AX 1030s in a VRRP-A config. I'm trying to get an accurate count of active connections through a service group that has multiple servers used for ldaps. The graphs/tables on the monitor tab don't reflect the current active connection count. I know this because…
-
AX 2500 in two different locations
Hi, My company has two AX 2500 (2.7.1-GR1) forming an aVCS cluster. The boxes are in the same building right now and we want to move one box to another DC. Both sites are connected via L2 service and latency is low. The interface election protocol runs on the management interface for aVCS. We want to keep the benefits of…
-
1030S connect to Cisco Nexus 9K
hi all, i'm trying to connect A10-1030s 10GB port to 2 Cisco Nexus 9K. Using virtua; Port Channel (VPC) from 1030s to 2 Nexus 9k, but have looping error info. Is it can? Thanks.
-
GSLB Proxy | Inbound NHLD
Does anyone here tried to deployed GSLB proxy mode in NHDL setup?
-
How do I configure A10 Thunder with Interfaces Transparent?
Hi experts, Could you help me? I need configure a A10 Thunder ADC 1030s with firmware 4.1 and interfaces in mode transparent, I want that the interfaces in A10 works like a IPS (only the interfaces). Thanks
-
Updating vThunder in HA Pair - how to handle avcs with vrrp-a
Hello, I am looking at upgrading our vThunder load balancer and am wondering how I would go about disabling the avcs and vrrp-a to perform a successful upgrade of the secondary device. As I understand it, when just using vrrp-a, I could simply upgrade the secondary device, and then force the 1st device to standby with…
-
External health script using python
Hi, I am trying to write a python program to setup a external health monitor which expects a different text at different times. to elaborate the following is existing health monitor but the client indicated the server might return <COMM>0</COMM> sometimes. I didn't see regex options to implement this so looking for python…
-
Upgrade SoftAx 2.7.1 to 4.1
Has anyone successfully upgraded a SoftAx 2.7.1 to a 4.1 version?
-
[ACOS]:LSN: TCP user-quota exceeded on pool
Dear Support Team, We are using Thunder Series Unified Application Service Gateway TH930(A10) as CGN. Currently we have a problem with the following log message: ============================================================================================ Mar 15 2016 10:22:40 Notice [ACOS]:LSN: TCP user-quota exceeded on…
-
Thunder 930 FAN/Power ISSUE
Hello This article places due to a problem with the Thunder 930 Model: Thunder 930 os: 2.7.1 P6 Logs: L4-Active # show enviroment Fan1A: OK-low / med Fan1B: OK-low / med Fan2A: OK-low / med Fan2B: FAILED Fan3A: OK-low / med Fan3B: OK-low / med Fan4A: OK-low / med Fan4B: OK-low / med System VOltage OK Oct 17 2015 14:52:43…
-
request-header-insert and client IP
Hi Is it possible to pass the client IP address using request-header-insert? I have tried the following but always end up with the literal rather than the client's IP address request-header-insert X-CLIENT-IP:[IP::client_addr] insert-always Many thanks Huw
-
Cannot distribute traffics evenly by using round robin
Hello All, Customer use the round-robin method without any persist template. Total sessions are not load balancing evenly below; Surely I checked again after clearing sessions. And the monitor of real servers was normal. But sessions still distributed evenly. I think this issue is limited to my customer......:) However...I…
-
Weak Diffie-Hellman - Custom DH Parameters
Hi All, I have just implemented some 3030S and migrated some services across in our production environment. The 3030S terminate SSL for the backend services. Out of curiosity I ran some SSL LABS test against the services and they all flagged errors with weak Diffie-Hellman key Exchange Parameters and therefore capped the…
-
Interface Speed and Duplex after upgrade.
Hi All, I have recently upgraded our 3030S from 2.7.2P6 to 4.0.1. I followed the upgrade procedure in the release documentation including parsing the backup through the python migration script. I encountered many issue when I rebooted and the applied the restoration of the config from the script. one of which is that I can…
-
Replacing Web Certificate (for GUI)
I am beginning to config a recently-purchased Thunder 3030 and need to replace the web certificate. I have a wildcard cert that I use for most other objects in the network (*.company.com) and I am having problems trying to install the cert, key, and chain cert. Unfortunately the error is not very descriptive - all I see in…
-
AX1030 Still crashing opening large list ssl template
Hi, I am having issues with my ax1030 loadbalancers. When i try to open the list of client-ssl templates the machines locks up (no ping) and the slave becomes master. I have reported this many times to A10, but every time they say to wait for the next release. Each new release does not help me with this problem. I have a…
-
problem with my sorry server
Hello: I have two service-group,(servers X and sorry servers). When my primary service-group fail (all servers down) sorry server respond in other service-group (this step is okay) but when primary service-group came back, I (have) need to wait about 8 minutes (that time is a configuracion for sticky in primary…
-
NHLD VRRP
Does anyone here tried to setup a VRRP-A ACTIVE ACTIVE on NHLD? Kindly share your config. Thanks.
-
Bandwidth checking: SNMP load balancing for NHLD
Does anyone here tried to configure SNMP load balancing for NHLD ISP links bandwidth checking?
-
Deletion of connections when real a real server goes down.
Hi experts, I'm looking for solutions regarding connectivity issue when a real server goes down. Actually, I'm deploying Thunders for FWLB and tested for failover of Firewalls. When a firewall goes down, connected clients are failed to communicate as expected. I wonder the ACOS able to delete connections when health…
-
Question about VRRP log
Hi All I have been configured VRRP-A on the 4.0.x. What does the following log mean? Something wrong for configuring VRRP? Please advice. Nov 24 2015 18:30:50 Warning [HA]:VRRP-A device 1 partition 0 vrid 13 has different failover policy settings: failover policy used: 1 VRRP conifguration is; DEVICE#1 vrrp-a common…
-
aXapi for ram cache connecitions
I'm looking at the aXAPI for version AX Release 2.7.0 and am unable to find the method for ram cache connection information. Is there currently a web method to get this information or possible release date for this functionality?
-
IP Address already configured on an Interface - when trying to add IP to VE
Currently have one VE with an IP address configured, and trying to add a second one I get this error: IP Address already configured on an Interface. This is within a tenant partition. The IP address I am trying to add does not overlap with the other VE or the management interface under the shared partition. The A10 is…
-
Default Route Tracking
Hi all, I have a pair of 3030s running 4.01 that I am setting up in an aVCS VRRP-a pair that will replace a couple of Cisco CSS devices. One question I do have is on the CSS pair I track an upstream external router with an ICMP ping to check if it is 'Alive' if it fails to respond then it forces a failover in the pair so…
-
direct access disable
Hi everyone Please check configuration , which can not be accessed by the client directly to server request in this feature , you must apply to a10 existing equipment alteon from alteon to thunder 930(2.7.1 P6) migration thank you
