-
NHLD Publics IP
I want to perform an NHLD to be able to balance the Internet traffic of my internal users through three ISP links, but in the perimeter FW that is in front of the A10 there is the publication of their services. That is to say, there is a NAT which publishes its servers. What considerations should be taken to avoid moving…
-
NHLD
Hello everyone! I would like to ask you for help, since I need to configure a client/server VPN where the client is the request from the internet, reaching A10, where it balances 3 links (NHLD), then the client's request the A10 must send it to the Firewall (LAN) which is the VPN server. Thanks a lot for your help!
-
Snat in NHLD with alternate server
Hi I have this scenario in a client´s infrastructure where they have 2 Internet links in active pasive mode slb server LINK-1 20.20.20.1 alternate LINK-2 port 0 tcp port 0 udp slb server LINK-2 30.30.30.1 port 0 tcp port 0 udp --------------------------------------------------------------------------- slb service-group…
-
Destination IP rewrite NHLD
Hi Guys Is there a way to rewrite a Destination IP based in NHLD? For example if an internal client send traffic to the IP 1.1.1.1 the Wildcard will receive the traffic and the A10 will rewrite the destination from 1.1.1.1 to 20.20.20.20
-
How can I use a VS IP as a source NAT in WILDCARD VS
Hi, guys. I've observed instances in various clients where an SLB VS is configured alongside NHLD. When an internal client accesses the Internet, the SNAT is typically a pool or auto-NAT, based on our configuration. However, there are scenarios where exceptions are necessary, and an internal client must use the SLB VS IP…
-
2 Active Link and 1 Backup Link
Hi All, I have three ISP links. I want to configure 2 active links and 1 backup link (active when 2 primary links are down). I can configure a10 for 2 ISP links but the backup link doesn't have any idea. Could you please share a sample configuration for my problem? Thank you.
-
aFlex script to filter URL
Hi experts do you have aFlex script to filter the URL that the users are trying to reach to the internet. Basically, I have AC type class-list and URLs are configured on it. Once I have verified in aFlex that the URL which the user is trying to reach is on my class-list then I will redirect the traffic to a specific ISP.…
-
NHLD health monitor config examples ?
Hi, I have a scenario where a non-AS customer has contracted Internet connectivity with 3 ISPs and is doing NHLD. What would be some commonly-used health monitors to determine which ISP link is up or down? I've used DNS queries using Internet DNS servers with static routes to each DNS server going through a specific ISP,…
-
Link Load Balance A10 Thunder
Hi Everyone! I would like to know, what is the best form to make load balance on my A10 if i have 3 ISP links. Example LOCAL NET ---> Inside -- A10 --Outside ----3 ISP links i understand that is with a Wildcard VS, but i would like be sure of that. Please if you can help me.
-
outbound nat based on IP
I'm trying to configure LLB for ISP links and having some trouble with the outbound NAT. Basically when it goes out ISP1 it should default to NAT pool ISP_C for most users, but when it comes from one range (using individual IP in my testing) it needs to use NAT pool ISP_CTHSE Under my 0.0.0.0 VIP this aflex works: when…
-
NHLD: Application options dedicated for specific link
Hi Team: Setup:Next Hop Load Distributor Just want to ask, Is it possible to dedicate a specific application to use a specific ISP link? For ex. Skype traffic, all of the traffic from a skype client will only use ISP 1 link. Is this possible? if yes, how can we implement this. Looking forward to hearing from you soon.…
-
NHLD VRRP
Does anyone here tried to setup a VRRP-A ACTIVE ACTIVE on NHLD? Kindly share your config. Thanks.
-
Bandwidth checking: SNMP load balancing for NHLD
Does anyone here tried to configure SNMP load balancing for NHLD ISP links bandwidth checking?
-
Link Load Balancer using AX
Hi, Does anyone here deployed A10 AX as Link Load Balancer with GSLB inbound traffic server mode or subdomain mode? can you please share your running configuration as a reference. Kindly share your ideas about it Thanks you in advance
