I recently upgraded a Thunder 1040 from 4.1.4 to 6.0.3. We use it for CGN. Afterwards we got a few complaints about VPN, SIP, and gaming losing connection. One complaint specifically mentioned the iss…
Hi community, How could I clean up the ip addresses from the nat-pool which are in blacklists? I have issues with some users who can not open an specific url when they connect from FTTH home connectio…
Hello guys, Please I need to know, while setting a limit ID >user-quota tcp 2000 reserve 10 this means that 2000 ports will be the limit fot the whole NAT-POOL? (/24 mask) or per end user. And how can…
Hi everyone, I have a new challenge and it is the following I have a CGNAT solution already implemented in datacenter #1 but they bought another appliance and they are going to put it in datacenter #2…
hello i have A10 AX1030 on 4.1.4, build 332 and i configure CGN NAT on it my question is can i make some of my private IPs go over one of this CGN NAT pool let say i have public start IP x.x.x.3 end a…
Hi, We have a 1040S that we use primarily for CG Nat. We also have 3 HTTP video servers that have high demand on our network, and are currently statically load balanced. Can I load balance them using …
We do still have customers that cannot use their consoles. Primarily playstations but also others like x-boxes, with an DS-Lite / CGNAT connection that we provide as ISP. SInce we do not know a better…
Dear Support Team, We are using Thunder Series Unified Application Service Gateway TH930(A10) as CGN. Currently we have a problem with the following log message: ======================================…
