-
AX Series Inbound Link Loadbalance Tutorial
Dear All: Where can I find the document about AX Series Inbound Link Loadbalance Sample config or tutorial~thks
-
VIPs and routed solutions
Looking for the pros and cons of where VIPs are defined. In a layer 3 setup a VIP can be either 'in front' of the AX (in network x) or defined 'behind' the AX in the same network as the real servers (network z). What's the recommended best practice and or under what situations would you use the alternative (your not best…
-
vThunder 30 days trial - default login/pass not working
Hi All, I got the 30 days trial version pf vThunder virtual appliance and i get the login prompt but the default admin password is not working. Both CLI (SSH/console) and web GUI is not accepting the default password. Any idea guys ? error msg -- Jan 31 2014 09:52:29 vThunder a10logd: [SYSTEM] The user, admin, from the…
-
Moving config to new context
I installed a new AX1030 and have completed the configuration but now we have decided to put that config into another context. so how do I move a config file from one context to another.
-
MS Dynamics CRM 2011
Good Morning, Just starting with putting an Dynamics CRM 2011 installation behind our AXs. Had a look and can't see any specific documentation on A10s site, and was wondering if anyone else has done this before and got any pointers or gotchas they'd like to share. Cheers Stuart
-
F5 Config Migration Check and Help Needed
I got a orphan F5 require migration where encounter intermittent on services, the weird part is we are unsure of the services method; As from F5 we see the following which is unsure what it used for an require assistant to understand; - Listerner 10.160.1.42 -> What the used of this Listerner? - Default route used Router…
-
Service group description using aXAPI
How can I specify a description when creating a service group using the aXAPI (REST API)? I tried specifying it under key 'description', but the created service group does not have the description. Also aXAPI does not show the description of a service group created with using the Web GUI. I also want to edit service group…
-
Sticky sessions cookie issue
Hello I have an issue with sticky sessions, currently we're using a cookie set by the AX on http-request, the issue I have (it's a webshop) is that upon checkout, the store switches from http to https and thus we get a new cookie and there's a high probability that the shopping cart is lost due to server switch. This is…
-
Remove Header
I'd like to remove just the Negotiate from a WWW-Authenticate header, anyone have a suggest for how to accomplish this? I'm SSL offloading a website that is offering up Basic, Negotiate and NTLM in the Auth header. I'd like to remove just the negotiate if that possible such that the client doesn't try to use the Negotiate.…
-
SMTP Virtual Service...need to see clients IP
Hi. I have SMTP load balanced as part of an Exchange 2007 cluster. I am using one-arm mode for my AX devices, so am also using Source NAT on the service. Am also restricting access to the SMTP relay on the Exchange servers (not on AX's) by IP Address. Unfortunately when I send a message using SMTP the Exchange servers see…
-
Load balancing problem
i'm facing a problem with AX1030 as it only redirect the traffic to only one server and not redirect any traffic for the other server. Top logy: 2*AX1030 connected to two servers in routed mode
-
Multiple health-checks, compound with priority?
I would like to set up health-checks for several URLs per real-server, and I understand I can do this with compound checks. However, if one of the URLs fails on all real servers I don't want the entire website to go down. Is there some way to get one health-check per URL, and if one URL fails you lower the priority on the…
-
Web re-direct on the AX3030
Hi all, We are trying to set up an application on two servers fronted by the A10. Everything functionally up but clients cannot access the web pages. As an example the VIP url is https://test.ntu.ac.uk. The DNS A record is 192.168.99.39. However, the actual page on the server is https://test.ntu.ac.uk/jukeboxdrm. Can this…
-
Interfacing SoftAx to ESX 5.1 standard vswitch
Hi all, We have two SoftAX's used as Lab devices. I can communicate with them via the management interfaces, however, no communication via the Ethernet interfaces. These need to be trunks to pass the various vlans from the VM's. The server guys are unsure how to do this as they are telling me that apply one vlan to each…
-
T3 protocol
i have a problem the web logic application using the T3 protocol to communicate to the BRM database , on the Weblogic im pointing the VIP of BRM im using TCP protocol but they can't communicate, do you have aflex or recommendation of this matter
-
Load Balance Syslog Server
Has anyone used the A10 Ax devices to load balance syslog servers? I have a request to do so, and was wondering if anyone could share their experiences. Will be using a pair of AX3200-12's (prod) and a pair of AX1030s (staging). Thanks Antony
-
The website only load a blank page when use L7 "HTTP" SLB
Hi Team, I've just upgrade 3200-12 to ACOS2.7.1, One of web services (HTTP) could not be operated with old configuration: ..... slb virtual-server app_edocment_vserver 10.34.2.160 port 80 http ..... (The website only load a blank page). The website will load correctly when we change config "port 80 http" --> "port 80…
-
transparent caching specific content per server
hi i have a client that he wants to have a specific content per server, possible to help me what script on aflex. I have example below: server proxy1 (jp(e?g|e|2)|tiff?|bmp|gif|png) (cgi-bin) (php|jsp|cgi|asx) (php|jsp) server proxy2 (z(ip|[0-9]{2})|r(ar|[0-9]{2})|jar|bz2|gz|tar|rpm|deb|vpu) server proxy3…
-
AX Boxes Sending Email
Dears, Is there a way at which we can make the AX device sending email notifications upon failure of servers in the service group or upon negative health monitor results of the servers (server being marked down) ?? In case there is a way to do it, please share the idea and how to do it. Many thanks
-
(LSN)Increase Number LSN pool addresses over 10000 (Outsite address)
Hi Brothers I have a question relating to "Maximum numbers of LSN Pool IP Addresses" By default, the AX models that support LSN can support up to the following maximum numbers of LSN pool addresses (outside addresses) per system: • AX 5200 – 10,000 outside IPs, Can we change Maximum numbers of LSN pool addresses (outside…
-
SMPP Proto TCP interuption
Hi, Using Aflex script how to interrupt SMPP Proto TCP. Regards, Kiran
-
aXAPI upload a certificate, key via slb.ssl.upload
Hello, I had to upload about 50 certificates and keys into a box running version 2.6.1-P4. I read the AX_aXAPI_Ref_v2_6_1-P3-20111130.pdf document and found in chapter 6.31.4 “slb.ssl.upload” Method. There are these three parameter session_id, method and type. I am missing the information which file will be uploaded. What…
-
aXAPI: slb.template.client_ssl.create
Hey all, I was wondering if someone could lend a hand in regards to how to properly put together a request using python over aXAPI using the slb.template.client_ssl.create method. I was trying to setup the parameters but I'm getting confused using the Url-encode options and how to properly set the array, I was doing the…
-
axdebug shows 'Rerouting failure for forward traffic match"
While troubleshooting a new implementation with axdebug captures, I see dozens of messages pairs like this: @279485663 i( 3, 101, b4795)> ip 10.95.100.44 > 10.42.101.225 tcp 6310 > 443 PA 9b8c5dba:ee9455c7(37) @279485663 i( 3, 101, b4795)> Rerouting failure for forward traffic match And the page is 'waiting to load'. What…
-
Named virtual hosts like apache
Hello All, I am new to a10, my apologies if this is been answered elsewhere. I'd like to have one VIP that is public facing on eth2 interface and the eth1 is inside a private LAN with multiple iplanet web servers. On the dns side multiple fqdns are cnamed to the VIP. When a request comes to certain fqdn, I'd like to load…
-
VIP is difference subnet with AX interface
Hi, We have scenario: Router->AX->Server, AX interface to upstream router (client-site router) is difference subnet with VIP (for example: AX's Interface 1 connect to client-site Router has IP address 192.168.1.1/29, but VIP ip address is 192.168.200.1) the Real Server subnet is 192.168.100.1 /24. I tried to ping from AX…
-
SO how would you do? SLB planning...
Have the need for loadbalancing several internal systems. Systems and Clients are on the same subnet. Right now, AX is also on the same subnet. Dont like the DSR concept. Firstly dont know how to make Appliances have VIP as localhost. Also dont like that only TCP works with DSR. want to go higher up in layers.. Http / SMTP…
-
Cookie Security (HTTPOnly-/Secure-Flag)
Hi, It would be nice if it is possible to set this for the cookies (Cookie Persistence). Will this feature be available in one of the next releases? RFC 6265 (Chapter: 4.1.2.6. The HttpOnly Attribute) Regards
-
Health Monitoring
Posted by herve.schlecht@rbs.fr In EX configuration, how can I define a Monitoring check in which I check 2 IP address through ping. If one of the IP doesn't answer I need to disable th elink. BRgds
-
Connection Reuse
Posted by twolfe94022 We just purchased a pair of 5200-11's to replace a set of 3000's. Within 24hrs the box was at 96%. Our Linux team enabled keep-alives which brought it down to 20% but now their boxes are loaded up. The default setting for the template is 1000/40minutes. The 40 min trigger seems long. I would like to…
