Posted by jmaddox What is the difference in setting promiscuous vip on a physical interface and a VE? are both required in the case that you have a VE? what are the ramifications of only setting it on VE? on physical and not VE?
Posted by kmcewen@a10networks.com Can some one please explain the traffic flow through the VCS. I am working on an op where I cannot use SNAT and therefore reliying on the floating IP which is the default gateway for the servers. How do we ensure that the traffic flows back via the incomming blade? Ta Ken
Posted by jmaddox HTTP::version "1.0" should turn off chunking on the server. Is there a way to turn off http chunking for the client side connection?
Posted by shakedown1979 Background: I have several Apache hosts (~60) on a single instance -- all of which need basic http/https monitors. I have matched the interval/retry/timeout values close to what our previous load balancers used. Here is an example of one of the new monitors: health monitor M-HTTP interval 10 retry 1…
Posted by jgreen When using preconfigured roles in radius, a vendor assigned attribute of 2, and a decimal value of 1-12 it works; however, when I create a custom role what value should be used for the attribute format and value?
Posted by pnicholcon Any thoughts, observations or comments on World IPv6 Day? We'd love to hear them. Post away.
Posted by kirbini I've been told, and and am trying to confirm (here and through testing) that the AX series (all of them) do not honor IPv6 ICMP Type 2 messages. These messages indicate that fragmentation is needed but when we use the AX1000 as an IPv6 VIP in front of an IPv4 server group the AX does not properly fragment…
Posted by JackofallTrades Below is a sample of code for accessing the xAPI via PHP. I am using xPath and pear HTTP/REQUEST2. I am not a coder so ignore my slop. First I define the login information and the xAPI path. The code snippet is ax_main.php Code: <?php//pear install HTTP_Request2require 'HTTP/Request2.php';//define…
Posted by fitwate How to use the parameters（Out-of-sequence packet）， Please explain the "Out-of-sequence packet"，Thanks. If we open the DDoS Protection in the Global ，How to view the results after the opening DDoS Protection ？ For example, if the AX2200 to prevent some of the ddos attack, how we view those elements…
Posted by fitwate When the gateway will use nat pool？ I have a question， ip nat pool ys 192.168.0.10 192.168.0.10 netmask 255.255.255.0 gateway ？ When this parameter will be used gateway ？ Thanks，I guess you will follow me
