hello colleagues, we have been asked to perform a balancing between Informix nodes and we are not using the normal health monitor tcp connection because the logs are filled with errors so we have to m…
Hello How can I configure the A10 to validate the GSLB gateway using a Health check with transparent to 8.8.8.8? for example, like we do in slb server because by default GSLB gateway validation is an …
While adding addition health monitors on our exsisting TH1080 A10 boxes we are getting below error "msg": "Could not create health monitor -> Reach max account limitation”. Is it something related to …
Hello, Just getting my feet wet with this as we have few sets of A10 vThunders on 4.1.4-GR1-P6 Build 90 and looking to setup a Health check so that if 443 is not responsive that A10 knows to pass traf…
Hi Everyone, we are migrating F5 to A10 in this process we would like to test Health monitors in A10 for samw which already working in F5, but unfortunately it is no working on A10 with same as below …
Hello First time posting here and new to A10..... hopefully I'm within guidelines :-) I'm currently trialing the 4.1.4 P10 software in our lab and can't get the real servers to come up. The reason is,…
We are in the process of load balancing radius with ACOS 4.1.4-GR1-P2 with Direct Server return. The load balancing works well, and now I have some awkward consequences I need to deal with. The failov…
I have three ISP line,ISP1,ISP2 and ISP3. We check the ISP's health status with ICMP protocol,when ISP1 down,how to know the status?When ISP1 down,If the health check monitor go out through ISP2 or IS…
Good afternoon everyone, I am attempting to perform a health check on an application server that returns a long nested string. This is more than a 200 or even a Success! on a health monitor page but s…
Hi, I have a scenario where a non-AS customer has contracted Internet connectivity with 3 ISPs and is doing NHLD. What would be some commonly-used health monitors to determine which ISP link is up or …
Hi I am new to Thunder and networks are not my day job. I have been asked to help out creating an external program health check to do an application level health check. I sort of have the basics worki…
I want to create health monitor compound (and,or,not)for checking MPLS link for all site 1 if site2-link1 has down all site use link2 only. I create health-monitor with(sub site1-link1 sub site2-link1…
I am setting up new A10s configured in transparent mode. There are many VLANs in use and eth1 connects up to the firewalls, and eth2 connects down to the switches. Both ports configured as trunks. I u…
Hello, I´m having the following requierement: Need to get the snmp information of the servers I´m load balancing, and when the CPU and MEMORY pass over 90%, put this server on maintenance mode, so won…
Hello, I'm currently evaluating A10 (so I'm a newbie !) and I have question about Health Check. I configured two Squid Servers for Load Balancing. The health check is done using a TCP session (to port…
Hi, I would like to create a external monitor health check that use TCP 11277 and send the command: - "GET / ctrl_vip_acct_trrloader" The answer expect is: "VALUE ctrl_vip_acct_trrloader 0 27" How can…
![User: "[Deleted User]"](https://wc.vanillicon.com/v2/cd9d2562a0b0a76b6be6a0f9684228cc.svg "[Deleted User]")
