Hi All, I have a model with Trunk, VLAN, LACP configured on 2 ports connecting to 2 Firewall servers and clients. However, from A10 I can ping the server and client. From the client I can ping the VE on A10, but cannot ping the VIP. Thanks
Hi experts, I have a trouble when i config in CLI the command "trunk-group" (ex: trunk-group 1 lacp) on Thunder 1030S device. It still actives in part shared, but not actives in part LV3. My configuraion is below: Netpo_Thunder_1030S#conf t Netpo_Thunder_1030S(config)#active-pa Netpo_Thunder_1030S(config)#active-partition…
Hello everyone. I hope you are great. We have this problem: We have a cluster of two A10 Thunder 930 with aVCS and 8 L3V partitions. Both Thunder 930s have two Ethernet interfaces in a trunk group with LACP. All partitions (including the "shared" partition) use this trunk group. We need to add ethernet interfaces to the…
Hi all, I'm new to a10 stuff, and I'm trying to set up some new AX3200-12. I'm trying to set up the devices in transparent mode with a pair of data interfaces bonded to a cisco switch using LACP negotiation. I can set up the trunk interfaces fine, and the switch shows that the port-channel is build properly, but as soon as…
