Options
A10 requirement
wanni
Member ✭
can you please advice us below features are supported on A10 ?
Replacing Peplink 380 LB
- Concurrent sessions supports up to 50K
- User browsing with load balancing and HA to support minimum 3 ISP links
- To function a inbound dns load balancing, All the records of the domain will be hold on the A10 (A, MX, CNAME, TXT, etc) for internal server LB.
- HA
- WAF
Replacing Peplink 380 LB
- Concurrent sessions supports up to 50K
- User browsing with load balancing and HA to support minimum 3 ISP links
- To function a inbound dns load balancing, All the records of the domain will be hold on the A10 (A, MX, CNAME, TXT, etc) for internal server LB.
- HA
- WAF
0
Comments
I would recommend contact your local A10 sales team to ensure the best device to meet your criteria.
Link to hardware specifications - https://www.a10networks.com/sites/default/files/A10-DS-15109-EN.pdf
- Concurrent sessions supports up to 50K
** Easily supported by all platforms.
– User browsing with load balancing and HA to support minimum 3 ISP links
** Supported - feature called Next Hop Load Distribution
– To function a inbound dns load balancing, All the records of the domain will be hold on the A10 (A, MX, CNAME, TXT, etc) for internal server LB.
** ADC can be authoritative or proxy nameserver server and supports all the DNS record types. ADC as the primary nameserver typically not recommended. Please consult local SE for further discussion on requirements.
– HA
** Supported, aVCS (Virtual Clustering)
– WAF
** Support, WAF feature included with no additional license required.
Thanks,
Terry
I need a small piece of information regarding virtual editions of A10 Thunder TPS platform.
I would like to know if there is a virtual edition available for this platform and if there is, is there a KVM compatible version available?
The recently released ACOS TPS v3.2.1-P1 is the first version to support virtual TPS and is supported only on Microsoft Hyper-V & VMware ESXi.
Please check with your local A10 sales team for more information on this version.
Thanks,
Terry
Would you be aware if A10 SSLi interceptor has a ESXi or KVM ready platform?
Regards,
Nandini
The Thunder ADC is supported on KVM & VMware, however the SSLi/CFW products are not. SSL decryption is very processor intensive and a virtual platform is not the correct platform for these features.
Thanks,
Terry