HA interface synchronization
![[Deleted User]](https://w2.vanillicon.com/v2/2bb29d357b97c8440eefe2439893b4f2.svg)
in System
Posted by jmaddox
According to the Configuration guide, items that are not backed up are vlans and trunks, "interface settings".
does interface settings = speed/duplex or ip configuration, or both
do interfaces in this context = also VEs or just physical interfaces?
If i configure a VE on a standby unit, but do not have that VE on the primary, then I do a sync from primary, does the VE go away along with its supporting VLAN? If "interface settings" include VE addresses and the vlans, it would seem that it should survive on the secondary.
According to the Configuration guide, items that are not backed up are vlans and trunks, "interface settings".
does interface settings = speed/duplex or ip configuration, or both
do interfaces in this context = also VEs or just physical interfaces?
If i configure a VE on a standby unit, but do not have that VE on the primary, then I do a sync from primary, does the VE go away along with its supporting VLAN? If "interface settings" include VE addresses and the vlans, it would seem that it should survive on the secondary.
0
Comments
"If i configure a VE on a standby unit, but do not have that VE on the primary, then I do a sync from primary, does the VE go away along with its supporting VLAN? If "interface settings" include VE addresses and the vlans, it would seem that it should survive on the secondary."
The AX does not sync interfaces, vlans, and VEs. If it did, the first time you did a sync, you'll have a duplicate IP error When you do a show run, the AX basically syncs everything below the HA section. Anything above that should be unique to that box and SHOULD NOT be the same as the other box.