A10 1030S - UPGRADE FAILED - Failed to expand the upgrade image

magusx

Hello,

I'm trying to upgrade A10 1030S from 2.7.2 to 4.1.4

I've tried:

• ACOS_non_FTA_4_1_4-GR1-P14_42.64.upg
• ACOS_non_FTA_4_1_4-GR1-P12_57.64.upg
• ACOS_non_FTA_4_1_4-GR1-P4_47.64.upg

with all files above returns the bellow error "Failed to expand the upgrade image"

Getting upgrade package ...
..............0 minutes 14 seconds
Done
Checking the integrity of the upgrade file...
Failed to expand the upgrade image

thanks

mdunn

Can you check the messages in "show log" for errors? Also, check free disk space with "show disk".

magusx

HI!

show log

###

TH1030S#show log
Log Buffer: 30000
Nov 08 2024 19:45:32 Error [SYSTEM]:tar: tar returned error status 2
Nov 08 2024 19:43:30 Notice [SYSTEM]:A cli session for user "admin" from 127.0.0.1 has been opened. Session ID assigned is 75.

show disk

###

TH1030S#show disk
Total(MB) Used Free Usage

76316 17631 58685 23.1%

Device Primary Disk

md0 Activemd1 Active

mdunn

Looks like plenty of disk. I am not familiar with that TAR error. Could you try downloading the upgrade image again? Also, can you try using the Web GUI to perform the upgrade?

Also note that the 2.7.2 to 4.1.4 upgrade guide calls this out:

To perform an upgrade to ACOS Release 4.x using the GUI, you must start with Release 2.7.2-P3. Earlier releases are not supported.

I've attached the full guide for your reference.

ACOS_Migration_2.7.x_4.x.pdf