"Address already used for an interface" when changing IP address VIP
vknyazhev
Member ✭
Hello, I need to change the address of the virtual server, it gives such an error. Reboot does not help.
0
Comments
Its my config:
TH1030S_01-Active-vMaster[1/1]#sh run
!Current configuration: 1478 bytes
!Configuration last updated at 16:50:28 MSK Wed Jul 13 2022
!Configuration last saved at 16:50:28 MSK Wed Jul 13 2022
!64-bit Advanced Core OS (ACOS) version 4.1.4-GR1-P10, build 65 (Apr-24-2022,06:45)
!
vrrp-a common
device-id 1
set-id 1
enable
!
device-context 1
vcs enable
!
device-context 2
vcs enable
!
vcs floating-ip 10.177.199.5 255.255.255.0
vcs ssl-enable
!
vcs device 1
priority 125
interfaces management
enable
!
vcs device 2
priority 120
interfaces management
enable
!
monitor buffer-usage 711760
!
no terminal auto-size
terminal length 0
!
device-context 1
hostname TH1030S_01
!
device-context 2
hostname TH1030S_02
!
device-context 1
timezone Europe/Moscow
!
device-context 2
timezone Europe/Moscow
!
ntp server 10.177.0.1
prefer
!
ntp server 10.177.199.1
!
device-context 1
interface management
ip address 10.177.199.3 255.255.255.0
!
device-context 2
interface management
ip address 10.177.199.4 255.255.255.0
!
interface ethernet 1/1
enable
ip address 192.168.195.3 255.255.255.0
!
interface ethernet 1/2
enable
ip address 172.16.0.10 255.255.255.248
!
interface ethernet 1/3
enable
ip address 172.16.0.27 255.255.255.248
!
interface ethernet 1/4
enable
ip address 172.16.0.18 255.255.255.248
!
interface ethernet 1/5
enable
ip address 10.1.0.1 255.255.255.252
!
interface ethernet 1/6
!
interface ethernet 1/7
!
interface ethernet 1/8
!
interface ethernet 1/9
!
interface ethernet 1/10
!
interface ethernet 2/1
enable
ip address 192.168.195.4 255.255.255.0
!
interface ethernet 2/2
enable
ip address 172.16.0.11 255.255.255.248
!
interface ethernet 2/3
enable
ip address 172.16.0.28 255.255.255.248
!
interface ethernet 2/4
enable
ip address 172.16.0.19 255.255.255.248
!
interface ethernet 2/5
enable
ip address 10.1.0.2 255.255.255.252
!
interface ethernet 2/6
!
interface ethernet 2/7
!
interface ethernet 2/8
!
interface ethernet 2/9
!
interface ethernet 2/10
!
vrrp-a l3-inline-mode
!
!
ip nat pool tls_srcnat 172.16.0.9 172.16.0.9 netmask /29
!
ip nat pool waf_srcnat 172.16.0.17 172.16.0.17 netmask /29
!
ip nat alg pptp enable
!
vrrp-a interface ethernet 1/5
!
vrrp-a interface ethernet 2/5
!
device-context 1
ip route 0.0.0.0 /0 10.177.199.1
!
device-context 2
ip route 0.0.0.0 /0 10.177.199.1
!
aam authentication log enable
aam authentication log format syslog
!
health monitor tcp
method tcp port 80
!
slb server TLS1 172.16.0.12
health-check ping
port 443 tcp
!
slb server TLS2 172.16.0.13
health-check ping
port 443 tcp
!
slb server WAF1 172.16.0.20
health-check ping
port 80 tcp
!
slb server WAF2 172.16.0.21
health-check ping
port 80 tcp
!
slb service-group TLS_HTTPS tcp
member TLS1 443
member TLS2 443
!
slb service-group WAF_HTTP tcp
member WAF1 80
member WAF2 80
!
slb virtual-server VIP_TLS_HTTPS 192.168.195.5 /24
port 443 tcp
source-nat pool tls_srcnat
service-group TLS_HTTPS
!
slb virtual-server VIP_WAF_HTTP 172.16.0.29 /29
port 80 tcp
source-nat pool waf_srcnat
service-group WAF_HTTP
!
sflow setting local-collection
!
sflow collector ip 127.0.0.1 6343
!
!
end
!Current config commit point for partition 0 is 0 & config mode is classical-mode
TH1030S_01-Active-vMaster[1/1]#
hello
try entering the vip address without the netmask
Hello!You my savoir!
Thank you!That helped