Trunk interface is not allowed on vlan in non promiscuous mode

MoratoMorato Member ✭
in System

Hi,

I created the TRUNK lacp. WHEN I try create vlan and tagg to trunk id 1 the tag fail with the message: Trunk interface is not allowed on vlan in non promiscuous mode

 

Example:

interface ethernet 1/1

 enable

 trunk-group 1 lacp

interface ethernet 1/2

 enable

 trunk-group 1 lacp

interface ethernet 2/1

 enable

 trunk-group 1 lacp

interface ethernet 2/2

 enable

 trunk-group 1 lacp

interface trunk 1/1

interface trunk 2/1

 

 

(config:1)#vlan 1/200

(config:1-vlan:1/200)#tagged trunk 1

Trunk interface is not allowed on vlan in non promiscuous mode.

(config:1-vlan:1/200)#

Comments

  • mdunnmdunn Member, A10ers ✭✭✭

    Running the command "system promiscuous-mode" from configuration terminal in shared partition will resolve this, but I'm not certain on why this is a requirement for LACP functionality.

  • MoratoMorato Member ✭

    Hi mdunn,


    You're sure!! I runned "system promiscuous-mode" on share partition.

    After that I runned "write memory" and for fihish, I runned "reload"


    Now I can create VLAN on TRUNK


    Thanks

Sign In or Register to comment.

© Copyright 2024 - A10 Networks Community - All Rights Reserved. | Legal