Cacti Template A10

SMS.SoporteN3

Hi support,

Please, someboy can you help me about create graph cacti for to view current connections for each virtual server:

I can do graph with whole snmp query but only can view first one query, the others query doesn´t can view on the graph.

For example:

.1.3.6.1.4.1.22610.2.4.3.4.2.1.1.9.18.34.68.77.90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.53
.1.3.6.1.4.1.22610.2.4.3.4.2.1.1.9.18.34.68.77.90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.54
.1.3.6.1.4.1.22610.2.4.3.4.2.1.1.9.18.34.68.77.90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.55

Its possible that exist some problem with snmp indexed??



axVirtualServerStatCurConns.18.34.68.77. 90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.53
54
axVirtualServerStatCurConns.18.34.68.77. 90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.54
229
axVirtualServerStatCurConns.18.34.68.77. 90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.55
1
axVirtualServerStatCurConns.19.34.68.77. 90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.49.54
0
axVirtualServerStatCurConns.20.34.68.77. 90.34.58.49.52.55.46.56.52.46.49.52.49.4 6.49.49.49
0
axVirtualServerStatCurConns.25.34.73.78. 45.79.78.69.65.82.77.34.58.49.48.46.49.5 4.54.46.54.56.46.49.49.49
0

Thank for support.

tmitsuhata

Hi,
According to your SNMP GET outputs above, I can see you are getting data (concurrent session counts) on each VIP from the A10 device. Are you saying you see the graph for the first one ending with 6.53 (VIP ending with .5) but not for all other counters/VIP?
Typically, those indexes(or SNMP OIDs) are created using ASCII code based on your configuration (e.g. VIP) and the above output look fine to me. You can also check the OID on the A10 device using CLI "#show snmp oid virtual-server".
Do you see any error on retrieving those SNMP response on the Cacti side?
Are you, by any chance, using a Cacti template provided by A10?

Thanks.