AX 1030 ADC - vBlade thread stopped

Got few warnings popup, what does these means? Significant?

Warning [VCS] vBlade thread stopped
Warning [VCS] vBlade thread: peer gone, reconnect (0)
Warning [VCS] something wrong with the connection, try to reconnect
Warning [VCS] vMaster(device 2) is gone:lack of heartbeats


Warning [VCS] vBlade daemon SIGALRM is not blocked

Warning [ACOS] HA Gateway check failed for 10.x.x.x

Error [VCS] Device specific configuration <Module: 41217 Type: 7
Sub-type: 558> failed to execute on device <1>: Communication error with LB process


Warning [VCS] vBlade thread stopped
Warning [VCS] vBlade lose connect with vMaster
Warning [VCS] vBlade thread: peer gone, reconnect (0)
Warning [VCS] something wrong with the connection, try to reconnect


Warning [ACOS] The total IP multicast packets 59015 per second has exceeded
the configured all VLAN limit of 5000
Tagged:

Comments

  • dshindshin Member
    edited November 2017
    Ins007,

    Please initiate a "show core" command to validate if the device is still in service and this command should identify where the crashed had occured. It looks like the vblade device maybe in the process of crashing so thats the cause of the system to stop the connection to vMaster. And later message states "Communication error with LB process" means vBlade already crashed.

    Genard
Sign In or Register to comment.