"[VCS]:aVCS daemon start running" msg

renatorbrancorenatorbranco Member ✭
in ADC - Application Delivery
Hi all !
I'm new user in AX ADC 3200 and I don't have experience.

In my AX 3200 log has the msg :

Jan 22 2015 15:59:10 Notice [SYSTEM]:A cli session for user "admin" from 172.28.3.140 has been opened. Session ID assigned is 2.
Jan 22 2015 15:59:04 Error [SYSTEM]:The user, admin, from the remote host, 172.28.3.140, failed in the CLI authentication.
Jan 22 2015 15:59:04 Warning [SYSTEM]:Local authentication failed(user: admin): Admin password error
Jan 22 2015 15:52:30 Notice [SYSTEM]:A web session for user "slb-admin" from 200.198.136.76 has been opened. Session ID assigned is 1.
Jan 22 2015 15:52:30 Warning [SYSTEM]:Radius authentication failed(user: slb-admin): Contact with remote server failed
Jan 22 2015 15:52:30 Error [SYSTEM]:All RADIUS servers failed to respond.
Jan 22 2015 15:52:30 Error [SYSTEM]:RADIUS server 10.127.9.15 failed to respond
Jan 22 2015 15:52:27 Error [SYSTEM]:RADIUS server 10.127.9.15 failed to respond
Jan 22 2015 15:52:24 Error [SYSTEM]:RADIUS server 10.127.9.15 failed to respond
Jan 22 2015 15:52:21 Warning [SYSTEM]:Look up NAS-IP-Address failed.
Jan 22 2015 15:50:26 Error [SYSTEM]:NTP server pool.ntp.br status is unknown
Jan 22 2015 15:50:26 Error [SYSTEM]:NTP server 200.198.129.131 is not reachable
Jan 22 2015 15:50:26 Error [SYSTEM]:NTP server 200.198.128.2 is not reachable
Jan 22 2015 15:49:36 Info [AX]:Port 2 is now a working member of Trunk 2
Jan 22 2015 15:49:35 Info [AX]:Trunk 2 is now Up
Jan 22 2015 15:49:35 Info [AX]:Port 1 is now a working member of Trunk 2
Jan 22 2015 15:49:35 Info [AX]:Port 26 is now a working member of Trunk 1
Jan 22 2015 15:49:35 Info [AX]:Trunk 1 is now Up
Jan 22 2015 15:49:35 Info [AX]:Port 25 is now a working member of Trunk 1
Jan 22 2015 15:49:32 Info [WEB]:Web server started.
Jan 22 2015 15:49:32 Info [INIT]:Data plane successfully initialized. AX is ready to process traffic.
Jan 22 2015 15:49:32 Notice [SYSTEM]:Session ID 2 is now closed
Jan 22 2015 15:49:31 Info [AX]:Port 1 is now up
Jan 22 2015 15:49:31 Info [AX]:Port 2 is now up
Jan 22 2015 15:49:30 Info [AX]:Port 25 is now up
Jan 22 2015 15:49:30 Info [AX]:Port 26 is now up
Jan 22 2015 15:49:27 Info [SYSTEM]:Management service telnet now enabled
Jan 22 2015 15:49:27 Info [SYSTEM]:Management service snmp now enabled
Jan 22 2015 15:49:27 Info [SYSTEM]:Management service https now enabled
Jan 22 2015 15:49:27 Info [SYSTEM]:Management service http now enabled
Jan 22 2015 15:49:27 Info [SYSTEM]:Management service ssh now enabled
Jan 22 2015 15:49:27 Notice [SNMP]:Change the syscontact to DTC-SGR - Ramal 3101.
Jan 22 2015 15:49:27 Notice [SNMP]:Change the syslocation to Sala 2 - NFE - A10-SiteA.
Jan 22 2015 15:49:27 Notice [SNMP]:Start the SNMP service successfully
Jan 22 2015 15:49:20 Notice [SYSTEM]:A cli session for user "admin" from 127.0.0.1 has been opened. Session ID assigned is 2.
Jan 22 2015 15:49:14 Info [COMPRESSION]:Hardware compression device not installed on AX
Jan 22 2015 15:49:14 Info [GSLB]:Initialization done
Jan 22 2015 15:49:12 Info [Fail Safe]:Fail Safe is initialized.
Jan 22 2015 15:48:56 Info [VCS]:aVCS daemon start running

what is this ?
Do the ax is rebooting ?
Where I find documentation/information about this ?
what do I do for thoubleshooting ?

Thanks

Comments

  • renatorbrancorenatorbranco Member ✭
    edited January 2015
    Your version is

    sh version
    AX Series Advanced Traffic Manager AX3200-12
    Copyright 2007-2014 by A10 Networks, Inc. All A10 Networks products are
    protected by one or more of the following US patents and patents pending:
    8595819, 8595791, 8595383, 8584199, 8464333, 8423676, 8387128, 8332925
    8312507, 8291487, 8266235, 8151322, 8079077, 7979585, 7804956, 7716378
    7675854, 7665138, 7647635, 7627672, 7596695, 7577833, 7552126, 7392241
    7236491, 7139267, 6748084, 6658114, 6535516, 6473802, 6374300, 6363075
    6324286, 5931914, 5875185

    64-bit Advanced Core OS (ACOS) version 2.7.0-P6-SP2, build 3 (Jun-09-2014,20:52)
    Booted from Hard Disk secondary image

    Serial Number: AX32051213430002
    Firmware version: 2.10
    aFleX version: 2.0.0
    aXAPI version: 2.0, 1.2, 1.1, 1.0
    Hard Disk primary image version 2.7.1-P5-SP2, build 3
    Hard Disk secondary image (default) version 2.7.0-P6-SP2, build 3
    Compact Flash primary image version 2.7.1-P5-SP2, build 3
    Compact Flash secondary image (default) version 2.7.0-P6-SP2, build 3
    Last configuration saved at Jan-20-2015, 14:46
    Hardware: 8 CPUs(Stepping 2), Single 74G Hard disk
    Memory 24738 Mbyte, Free Memory 14777 Mbyte
    Hardware Manufacturing Code: 134311
    Current time is Jan-22-2015, 16:57
    The system has been up 74 days, 14 hours, 13 minutes
  • diederikdiederik Member ✭
    edited January 2015
    It looks like the system has indeed rebooted.

    But unfortunately the logging you have provided does not include the information from before the reboot, so you can't see what has caused it.

    Later during the boot process there seem to be some network issues, so maybe that is what is causing the reboot?

    The best way to get to the bottom of this, would be to open a case with support.
  • renatorbrancorenatorbranco Member ✭
    edited January 2015
    Thanks !
    I will open a case !
Sign In or Register to comment.

© Copyright 2024 - A10 Networks Community - All Rights Reserved. | Legal