VCS avec VRRP-a shows unknown status

Product Discussions ADC - Application Delivery
1

Hello,

I have a problem with my VRRP-a configuration. Everything works fine, I dont have problem with the service but when I login into the ADC I see the VRRP-a status as unknown.

Here’s some troubleshooting I have done:
AX-vMaster[1/1]#sh vcs summary
VCS Chassis:
   VCS Enabled: Yes
   Chassis ID: 1

   Floating IP:                               10.20.10.102
   Mask:                                      255.255.255.0
   Multicast IP:                              224.0.0.210

Multicast Port: 41217
   Version: 2.7.2-P12-SP3.b3
   VCS Monitor Sync: DISABLE

Members(* means local device):
ID State Priority IP:Port Location Sync-State

---------------------------------------------------------------------------------------------
 1   vMaster(\*)  200      10.20.10.103:41216                          Local
 2   vBlade      190      10.20.10.104:41216                          Remote    N/A

Ax-1-vMaster[1/1]\#show vrrp-a

vrid 1
Unit State Weight Priority
1 (Local) Active 65534 200
                became Active at: Aug 31 10:13:52 2018
                          for 0 Day, 3 Hour,24 min
2 (Peer) Standby 65534 200 *
vrid 2
Unit State Weight Priority
1 (Local) Active 65534 255
                became Active at: Aug 31 11:42:33 2018
                          for 0 Day, 1 Hour,55 min

2 (Peer)        Standby         65534           255                     \*
Running VRID(s): 1 2

Here’s the configuration:

vrrp-a device-id 1
vrrp-a set-id 2

vcs enable
vcs vMaster-id 2
vcs chassis-id 2

vcs floating-ip 10.20.10.105 /24
vcs multicast-ip 224.0.0.210

vcs device 1
priority 200
interfaces management
enable
vcs device 2
priority 190
interfaces management
enable
!
vcs local-device 1
vrrp-a enable
vrrp-a hostid_append_to_vrid default
vrrp-a vrid default
   priority 200 device 1
   priority 200 device 2
!
vrrp-a vrid 1
   floating-ip 10.20.111.8
   priority 200 device 1
   priority 190 device 2
   tracking-options
      gateway 10.20.111.3 priority-cost 1 device 2
!
vrrp-a vrid 2
   floating-ip 10.20.111.9
   priority 255 device 1
   priority 200 device 2
   tracking-options
      gateway 10.20.111.3 priority-cost 1 device 2
!
vrrp-a interface ethernet 3 device 1
vrrp-a interface ethernet 3 device 2

vrrp-a preferred-session-sync-port ethernet 3  vlan 4001 device 1
vrrp-a preferred-session-sync-port ethernet 3  vlan 4001 device 2

!

Thanks in advance for your help

2

Things look good to me. What do you mean “VRRP-a status as unknown”. I don’t see anything saying unknown