Realtime Memory High Performance

Product Discussions System
1

Hi everyone,
I have a TH3030S device always in high performance of Realtime Memory status (85% - 88%)
Although I have not set anything, only set ip management.
How can I fix it and what is the root cause?
Best regards!

z3169145932721_9c8e0b6756b282e3b923db9b358a1338.jpg
z3169145932721_9c8e0b6756b282e3b923db9b358a1338.jpg2560×1259 501 KB

2

Improve performance in Realtime System

  1. Minimize Tasks in the Application.
  2. Use Memory Block Pools over Byte Pools.
  3. Don’t Create and Destroy Objects.
  4. Consider Using Event Flags.
  5. Minimize RTOS Objects.
  6. Optimize the Task Stacks.
  7. Turn Off Unused Features.
3

Hi jacksondoe,
Sorry about my information is not correct. My device model is AX3000 not TH3030S.
And the TAC supporter advices me use the version 2.7.2-P16 for this model.
After set the version 2.7.2 for device, the memory usage about 67%. He also said that is normal, the memory is pre-allocated.
But I still think it is high performance :frowning:
How about your ideas?
Best regards!

image.png
image.png1103×628 399 KB

4

Hi Alden,
The feedback from TAC regarding the pre-allocation of memory is accurate. It is normal to see utilization of this level. As the device uptime and utilization increases, you should see only a minimal increase in memory unless the system is reaching its specification limits.