how can we configure unequal load balance between two servers

Product Discussions System
1

We have two servers, we need to do upgrade for them, in order to decrease the users that will disconnect we need to do unequal load balance between them, anybody can advice how to do this kind of configuration
thanks

2

If you assign a weight to the real server and then change the service-group method to weighted-rr, this will accomplish your goals. Note that the default service-group method will not factor the slb server weight in the load balancing decision, so the method will need to be changed in all service-groups where unequal load balancing is desired.

slb server server1 10.1.1.5
  weight 10
  port 80 tcp
!
slb server server2 10.1.1.6
  port 80 tcp
!
slb service-group web-servers tcp
  method weighted-rr
  member server1 80
  member server2 80
!

The above configuration should give server1 10x more connections than server2.

3

thank you so much, we will try to apply this solution, on another hand, is there a need to disable the health check, if yes then why?
and is there a need to define the connection number? please check below:

slb server server1 10.1.1.5
  health-check PING-test
  conn-limit <number of connections server can handle>
  weight 10
  port 80 tcp
!
slb server server2 10.1.1.6
  health-check disable
  port 80 tcp
   health-check-disable
!
slb service-group web-servers tcp
  method weighted-rr
  health-check-disable
  member server1 80
  member server2 80
4

I would not recommend disabling the health check unless you want the A10 to “blindly” send traffic to the slb server. The health check directly under the SLB server defaults to ping, and the health check under the TCP port will default to a 3-way handshake.
Connection limit is optional, but it can be useful to prevent overloading the slb server.
Hope that helps!

5

thank you so much