AX 1030 ADC - vBlade thread stopped

Product Discussions ADC - Application Delivery
,
1

Got few warnings popup, what does these means? Significant?

Warning [VCS] vBlade thread stopped Warning [VCS] vBlade thread: peer gone, reconnect (0) Warning [VCS] something wrong with the connection, try to reconnect Warning [VCS] vMaster(device 2) is gone:lack of heartbeats

Warning [VCS] vBlade daemon SIGALRM is not blocked

Warning [ACOS] HA Gateway check failed for 10.x.x.x

Error [VCS] Device specific configuration <Module: 41217 Type: 7 Sub-type: 558> failed to execute on device <1>: Communication error with LB process

Warning [VCS] vBlade thread stopped Warning [VCS] vBlade lose connect with vMaster Warning [VCS] vBlade thread: peer gone, reconnect (0) Warning [VCS] something wrong with the connection, try to reconnect

Warning [ACOS] The total IP multicast packets 59015 per second has exceeded the configured all VLAN limit of 5000

2

Ins007,

Please initiate a “show core” command to validate if the device is still in service and this command should identify where the crashed had occured. It looks like the vblade device maybe in the process of crashing so thats the cause of the system to stop the connection to vMaster. And later message states “Communication error with LB process” means vBlade already crashed.

Genard