# Virtual Server with 443 (HTTPS) **URL:** \ **Category:** ADC - Application Delivery\ **Created:** [April 27, 2022, 3:33am UTC](https://community.a10networks.com/t/virtual-server-with-443-https/719 "2022-04-27T03:33:20Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![rodrigosh](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@rodrigosh](https://community.a10networks.com/u/rodrigosh)\ **Post date:** [April 27, 2022, 3:33am UTC](https://community.a10networks.com/t/virtual-server-with-443-https/719/1 "2022-04-27T03:33:20Z")
Dear, I am new to A10 and I need to create a virtual server with a service group and its real servers in 443. When I finish the configuration and test the site in the browser, it gives me the following: bad request Your browser sent a request that this server could not understand. Reason: You’re speaking plain HTTP to an SSL-enabled server port. Instead use the HTTPS scheme to access this URL, please. ---
**Author:** ![mdunn](https://avatars.discourse-cdn.com/v4/letter/m/87869e/32.png) [@mdunn](https://community.a10networks.com/u/mdunn)\ **Post date:** [April 27, 2022, 3:47pm UTC](https://community.a10networks.com/t/virtual-server-with-443-https/719/2 "2022-04-27T15:47:48Z")
This sounds like your web server on the back end is expecting a SSL connection from the A10. When you configure a Layer 7 virtual port such as “port 443 https”, the A10 will act as a full HTTP proxy. A client-ssl template is needed between the client and the A10, and a server-ssl template is needed if SSL is required between A10 and the back end server. Do you have both of these configured? Perhaps you can share a redacted VIP config. ---
**Author:** ![rodrigosh](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@rodrigosh](https://community.a10networks.com/u/rodrigosh)\ **Post date:** [April 27, 2022, 8:16pm UTC](https://community.a10networks.com/t/virtual-server-with-443-https/719/3 "2022-04-27T20:16:38Z")
Does the GUI configuration work for you or do you need the CLI configuration? As I said before, I am new to A10 and I am not comfortable with the commands they have. ---
**Author:** ![mdunn](https://avatars.discourse-cdn.com/v4/letter/m/87869e/32.png) [@mdunn](https://community.a10networks.com/u/mdunn)\ **Post date:** [April 28, 2022, 3:50pm UTC](https://community.a10networks.com/t/virtual-server-with-443-https/719/4 "2022-04-28T15:50:22Z")
Sure - in the gui, navigate to ADC \> SLB and open your VIP. Edit the 443 vPort on the right. Here you will see your client / server SSL template configuration. You can also create these templates from this screen by clicking the “Add+” button on the right side. From CLI, you can run the command “show run slb virtual-server” which will display all your VIP config.