# VCS and ve-stats enabled

**URL:** <https://community.a10networks.com/t/vcs-and-ve-stats-enabled/154>\
**Category:** System\
**Created:** [May 2, 2012, 11:06am UTC](https://community.a10networks.com/t/vcs-and-ve-stats-enabled/154 "2012-05-02T11:06:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kgh](https://avatars.discourse-cdn.com/v4/letter/k/8dc957/32.png) [@kgh](https://community.a10networks.com/u/kgh)\
**Post date:** [May 2, 2012, 11:06am UTC](https://community.a10networks.com/t/vcs-and-ve-stats-enabled/154/1 "2012-05-02T11:06:41Z")

</div>

Hello,

is it possible to active “ve-stats enabled” in a VCS, so that is saved in the startup and running config? I tried it, but got this message in the logfile. Ve stats are counted on the vcs master, but not on the vcs blade. Vcs master and vrrp-a active are the same system at the moment.

```auto
-------------------------------------
Active(config)\#show version | inc version
      64-bit Advanced Core OS (ACOS) version 2.6.1-GR1, build 107 (Feb-27-2012,17:58)
-------------------------------------
Active(config)\#ve-stats enable 
Active(config)\#sh log               

```

May 02 2012 11:15:37 Error [VCS]:Failed to save or get device specific configuration to configuration database. VCS: Invalid parameter  
May 02 2012 11:15:37 Error [VCS]:The message is not supported. Module: 41217 Type: 7 Sub-type: 86

```auto
---------------------------------

```

VirtualEthernet 3524 is up, line protocol is up  
&nbsp;&nbsp;Hardware is VirtualEthernet, Address is 001f.a002.b578  
&nbsp;&nbsp;Router Interface for L2 Vlan 3524  
&nbsp;&nbsp;173880 packets input 42046784 bytes  
&nbsp;&nbsp;Received 11885 broadcasts, Received 26198 multicasts, Received 135797 unicasts  
&nbsp;&nbsp;144748 packets output 28654209 bytes  
&nbsp;&nbsp;Transmitted 7577 broadcasts, Transmitted 26149 multicasts, Transmitted 111022 unicasts

```auto
-----------------------------------

Active(config)\#show startup-config | include ve-sta
Active(config)\#show run | include ve-st

-----------------------------------

```

Kind regards  
Klaus

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex002/uploads/a10_community/original/1X/bb9f186d33804d3044a0374e589f49fdf3be1328.png) [@system](https://community.a10networks.com/u/system)\
**Post date:** [July 7, 2012, 3:45am UTC](https://community.a10networks.com/t/vcs-and-ve-stats-enabled/154/2 "2012-07-07T03:45:31Z")

</div>

We investigated this and we have discovered this to be a bug We have filed a bug for this issue. The bug ID #88948, If you have any questions you can call A10 support with the bug ID.