# Resatrict Management access to Specific IP

**URL:** <https://community.a10networks.com/t/resatrict-management-access-to-specific-ip/415>\
**Category:** ADC - Application Delivery\
**Created:** [October 27, 2016, 7:28am UTC](https://community.a10networks.com/t/resatrict-management-access-to-specific-ip/415 "2016-10-27T07:28:15Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![micheal](https://avatars.discourse-cdn.com/v4/letter/m/edb3f5/32.png) [@micheal](https://community.a10networks.com/u/micheal)\
**Post date:** [October 27, 2016, 7:28am UTC](https://community.a10networks.com/t/resatrict-management-access-to-specific-ip/415/1 "2016-10-27T07:28:15Z")

</div>

Hi,

i Need to know how to restrict Management access of device to a specific IP or Network. I have assigned specific Network IP for Management Access, but still device is accessible to from other LAN IPs (i.e Assigned to Internal & External Partition) as well.

---

<div class="post-metadata">

**Author:** ![micheal](https://avatars.discourse-cdn.com/v4/letter/m/edb3f5/32.png) [@micheal](https://community.a10networks.com/u/micheal)\
**Post date:** [October 31, 2016, 6:47am UTC](https://community.a10networks.com/t/resatrict-management-access-to-specific-ip/415/2 "2016-10-31T06:47:27Z")

</div>

any update on this?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex002/uploads/a10_community/original/1X/bb9f186d33804d3044a0374e589f49fdf3be1328.png) [@system](https://community.a10networks.com/u/system)\
**Post date:** [October 31, 2016, 8:26pm UTC](https://community.a10networks.com/t/resatrict-management-access-to-specific-ip/415/3 "2016-10-31T20:26:17Z")

</div>

You can create an access-list and apply that to the enable-management configuration:  
ACOS(config)#access-list 1 permit 10.10.10.0 0.0.0.255  
Then apply the ACL using either of these commands:  
ACOS(config)# enable-management service acl 1 management  
or

```auto
ACOS(config)\# interface management
ACOS(config-if:management)\# access-list 1 in

```

Is this not working?

---

<div class="post-metadata">

**Author:** ![micheal](https://avatars.discourse-cdn.com/v4/letter/m/edb3f5/32.png) [@micheal](https://community.a10networks.com/u/micheal)\
**Post date:** [November 1, 2016, 4:18am UTC](https://community.a10networks.com/t/resatrict-management-access-to-specific-ip/415/4 "2016-11-01T04:18:20Z")

</div>

basically i have crated two partition i.e (Internal & External) and assigned IPs to that partition. Now management through internal IP is allowed. I want that device management is only accessible via Management Network IP not Internal and external partition IPs. I have applied that said command but still device Management is accessible via Internal Partition. Kindly guide for solution.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex002/uploads/a10_community/original/1X/bb9f186d33804d3044a0374e589f49fdf3be1328.png) [@system](https://community.a10networks.com/u/system)\
**Post date:** [November 1, 2016, 9:25am UTC](https://community.a10networks.com/t/resatrict-management-access-to-specific-ip/415/5 "2016-11-01T09:25:11Z")

</div>

Kumar’s suggestion works.

Can you share the config?