Hello Evea,
We do support Next Hop Load Distribution on A10. For your example scenario, you can deploy it as follows:
1- Assign your application, e.g. Skype, a custom port to use, OTHER than 80 and 443 (which are the defaults)
2- Enable allow promiscuous VIP command on your client side interfaces only.
3- Set up Real Servers with wildcard ports 0 TCP, 0 UDP, 0 Others and that custom port number you chose (lets say 8080). For 8080 TCP, make sure you assign the IP address of the link intended for use by Skype e.g. ISP 1.
4- Configure a service group for the links (real servers). If the real server configurations for the links have both TCP and UDP ports, configure a service group for TCP and another service group for UDP.
5- Set up a wildcard VIP (0.0.0.0) on your device. Inside, have wildcard Virtual Ports 0 TCP, 0 UDP, 0 Others and the custom 8080 TCP.
Thanks,
Babur