# Inter partition Routing

**URL:** <https://community.a10networks.com/t/inter-partition-routing/721>\
**Category:** ADC - Application Delivery\
**Tags:** partition\
**Created:** [May 9, 2022, 5:23pm UTC](https://community.a10networks.com/t/inter-partition-routing/721 "2022-05-09T17:23:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![anfovar](https://avatars.discourse-cdn.com/v4/letter/a/bc79bd/32.png) [@anfovar](https://community.a10networks.com/u/anfovar)\
**Post date:** [May 9, 2022, 5:23pm UTC](https://community.a10networks.com/t/inter-partition-routing/721/1 "2022-05-09T17:23:15Z")

</div>

Hello  
I am trying to do a Inter partition Routing, i did two lv3 partitions, one partition has 1 port with the network 10.0.0.0/24 and the other partition has other port with the network 11.0.0.0/24 but when i do a ping it says network unreachable  
!  
partition P\_IPSEC-1 id 5 application-type adc  
!  
partition P\_VXLAN-1 id 6 application-type adc  
!  
!  
interface management  
&nbsp;ip address 192.168.75.66 255.255.255.0  
&nbsp;ip default-gateway 192.168.75.1  
!  
interface ethernet 1  
&nbsp;enable  
!  
interface ethernet 2  
&nbsp;enable  
!  
interface loopback 1  
&nbsp;ip address 1.1.1.1 255.255.255.255  
!  
!  
ip route 10.0.0.0 /24 partition P\_VXLAN-1  
!  
ip route 11.0.0.0 /24 partition P\_IPSEC-1  
###########################  
active-partition P\_IPSEC-1  
!  
!  
interface ethernet 2  
&nbsp;enable  
&nbsp;ip address 11.0.0.1 255.255.255.0  
!  
!  
ip route 0.0.0.0 /0 partition shared  
###########################  
active-partition P\_VXLAN-1  
!  
!  
interface ethernet 1  
&nbsp;enable  
&nbsp;ip address 10.0.0.1 255.255.255.0  
!  
!  
ip route 0.0.0.0 /0 partition shared  
!

---

<div class="post-metadata">

**Author:** ![mdunn](https://avatars.discourse-cdn.com/v4/letter/m/87869e/32.png) [@mdunn](https://community.a10networks.com/u/mdunn)\
**Post date:** [June 23, 2022, 2:51pm UTC](https://community.a10networks.com/t/inter-partition-routing/721/2 "2022-06-23T14:51:15Z")

</div>

Unfortunately, I do not believe inter-partition routing works in this fashion. Partition 5 cannot reach Partition 6 directly through Shared partition. Traffic will need to egress an ethernet interface and then ingress an ethernet interface for the traffic to forward to Partition 6.