# health monitor snmp

**URL:** <https://community.a10networks.com/t/health-monitor-snmp/331>\
**Category:** System\
**Created:** [September 28, 2015, 2:41pm UTC](https://community.a10networks.com/t/health-monitor-snmp/331 "2015-09-28T14:41:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![REDES\_STI\_UCHILE](https://avatars.discourse-cdn.com/v4/letter/r/d6d6ee/32.png) [@REDES\_STI\_UCHILE](https://community.a10networks.com/u/REDES_STI_UCHILE)\
**Post date:** [September 28, 2015, 2:41pm UTC](https://community.a10networks.com/t/health-monitor-snmp/331/1 "2015-09-28T14:41:34Z")

</div>

Hello,  
I need information about health monitor SNMP because I need to pass that configuration of CISCO to A10.

Cisco:

probe snmp snmp\_tomcat7djwfp  
&nbsp;&nbsp;port 161  
&nbsp;&nbsp;interval 3  
&nbsp;&nbsp;faildetect 5  
&nbsp;&nbsp;passdetect interval 5  
&nbsp;&nbsp;community monsti  
&nbsp;&nbsp;oid iso.3.6.1.4.1.2021.8.1.101.1  
&nbsp;&nbsp;&nbsp;&nbsp;type absolute max 666667  
&nbsp;&nbsp;&nbsp;&nbsp;threshold 3000

A10;  
health monitor snmp\_tomcat7djwfp  
method snmp community monsti oid 1.3.6.1.4.1.2021.8.1.101.1  
when I configured in A10 that health monitor didn’t work. I don’t understand what happend or my configuration it wrong?

I need any information please.

---

<div class="post-metadata">

**Author:** ![dshin](https://avatars.discourse-cdn.com/v4/letter/d/f05b48/32.png) [@dshin](https://community.a10networks.com/u/dshin)\
**Post date:** [September 28, 2015, 8:41pm UTC](https://community.a10networks.com/t/health-monitor-snmp/331/2 "2015-09-28T20:41:41Z")

</div>

Can you please provide answers to the following:

1. For the SNMP services to work in ACOS, the snmp services has to be enabled. Please verify or enable based on ACOS versions

```auto
A. 4.0.X code 
inside(config)\#snmp-server enable

B. 2.7 code 
inside(config)\#snmp enable 

```

1. Also I noticed that the IOD provided in your ACOS config sampleis still in Cisco’s OID ie…“1.3.6.1.4.1.2021.8.1.101.1”. You might want to update the OID information as well.

Let me know if it works otherwise so we can debug further.

Genard

---

<div class="post-metadata">

**Author:** ![REDES\_STI\_UCHILE](https://avatars.discourse-cdn.com/v4/letter/r/d6d6ee/32.png) [@REDES\_STI\_UCHILE](https://community.a10networks.com/u/REDES_STI_UCHILE)\
**Post date:** [October 1, 2015, 2:20pm UTC](https://community.a10networks.com/t/health-monitor-snmp/331/3 "2015-10-01T14:20:52Z")

</div>

Garcia, I review your question: 1. Snmp is enable in partition shared ((ACOS) version 2.7.1-P1) **snmp-server enable** 2. When I do “snmpwalk in different device to server” the answer is: @Artur:~$ sudo snmpwalk -v 1 -c monsti 172.32.64.84 1.3.6.1.4.1.2021.8.1.101.1 iso.3.6.1.4.1.2021.8.1.101.1 = **STRING: “5”** I need to realize a configuration, for example when the string reach 10, It changes server’s state to “DOWN”.