# Harmony Controller

**URL:** <https://community.a10networks.com/t/harmony-controller/835>\
**Category:** ADC - Application Delivery\
**Tags:** a10-thunder, harmony-controller\
**Created:** [April 4, 2024, 11:45pm UTC](https://community.a10networks.com/t/harmony-controller/835 "2024-04-04T23:45:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lynda](https://avatars.discourse-cdn.com/v4/letter/l/c6cbf5/32.png) [@Lynda](https://community.a10networks.com/u/Lynda)\
**Post date:** [April 4, 2024, 11:45pm UTC](https://community.a10networks.com/t/harmony-controller/835/1 "2024-04-04T23:45:49Z")

</div>

hi.  
How can I configure the A10 Harmony Controller from CLI or Web, have its IP address to connect it to the Internet

---

<div class="post-metadata">

**Author:** ![mdunn](https://avatars.discourse-cdn.com/v4/letter/m/87869e/32.png) [@mdunn](https://community.a10networks.com/u/mdunn)\
**Post date:** [April 5, 2024, 3:08pm UTC](https://community.a10networks.com/t/harmony-controller/835/2 "2024-04-05T15:08:37Z")

</div>

Harmony Controller is installed on top of a Linux server and relies on the underlying networking configuration of that server. You would need to configure that Linux server’s ethernet interface / DNS / gateway accordingly to provide Internet access.