# Command "trunk-group (id group) lacp"  is not enable in partition

**URL:** <https://community.a10networks.com/t/command-trunk-group-id-group-lacp-is-not-enable-in-partition/698>\
**Category:** ADC - Application Delivery\
**Tags:** lacp, partition\
**Created:** [December 23, 2021, 2:40am UTC](https://community.a10networks.com/t/command-trunk-group-id-group-lacp-is-not-enable-in-partition/698 "2021-12-23T02:40:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alden](https://avatars.discourse-cdn.com/v4/letter/a/258eb7/32.png) [@Alden](https://community.a10networks.com/u/Alden)\
**Post date:** [December 23, 2021, 2:40am UTC](https://community.a10networks.com/t/command-trunk-group-id-group-lacp-is-not-enable-in-partition/698/1 "2021-12-23T02:40:47Z")

</div>

Hi experts,  
I have a trouble when i config in CLI the command “trunk-group” (ex: trunk-group 1 lacp) on Thunder 1030S device.  
It still actives in part shared, but not actives in part LV3.  
My configuraion is below:  
Netpo\_Thunder\_1030S#conf t  
Netpo\_Thunder\_1030S(config)#active-pa  
Netpo\_Thunder\_1030S(config)#active-partition par1  
Current active partition: par1  
Netpo\_Thunder\_1030Spar1#interface ethernet 1  
Netpo\_Thunder\_1030Spar1#trunk-group 1 lacp  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;^  
% Unrecognized command.Invalid input detected at ‘^’ marker.  
I got it that the command “trunk-group” is not enable in partition except part shared, that’s right?  
How can i fix it?  
Best regards for all advice!

---

<div class="post-metadata">

**Author:** ![mdunn](https://avatars.discourse-cdn.com/v4/letter/m/87869e/32.png) [@mdunn](https://community.a10networks.com/u/mdunn)\
**Post date:** [January 3, 2022, 8:32pm UTC](https://community.a10networks.com/t/command-trunk-group-id-group-lacp-is-not-enable-in-partition/698/2 "2022-01-03T20:32:26Z")

</div>

Hi Alden,  
You are correct that the trunk-group config is handled in shared. Within the L3V partition, you can specify the tagged interface as the trunk without any additional config in the L3V. Here’s a simplified example. Hopefully this works for you:

```yaml
active-partition shared
interface ethernet 1 
  enable 
  trunk-group 1 lacp 
    timeout short 
!
interface ethernet 2 
  enable
  trunk-group 1 lacp 
    timeout short 
!
!
active-partition L3V
!
vlan 10 
  tagged trunk 1
  router-interface ve 10 
!
vlan 11 
  tagged trunk 1
  router-interface ve 11
!
vlan 12 
  tagged trunk 1
  router-interface ve 12 

```

---

<div class="post-metadata">

**Author:** ![Alden](https://avatars.discourse-cdn.com/v4/letter/a/258eb7/32.png) [@Alden](https://community.a10networks.com/u/Alden)\
**Post date:** [January 7, 2022, 4:32am UTC](https://community.a10networks.com/t/command-trunk-group-id-group-lacp-is-not-enable-in-partition/698/3 "2022-01-07T04:32:10Z")

</div>

Hi mdunn,  
Thanks for your advice. I also have a case with A10 support about that problem and the experts give me information same with you. My work are cleared.  
Thank you again!