# Clear DDoS Entries

**URL:** <https://community.a10networks.com/t/clear-ddos-entries/854>\
**Category:** CGN - CGNAT & IPv6 Migration\
**Created:** [June 10, 2024, 4:32pm UTC](https://community.a10networks.com/t/clear-ddos-entries/854 "2024-06-10T16:32:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![D4niel](https://avatars.discourse-cdn.com/v4/letter/d/65b543/32.png) [@D4niel](https://community.a10networks.com/u/D4niel)\
**Post date:** [June 10, 2024, 4:32pm UTC](https://community.a10networks.com/t/clear-ddos-entries/854/1 "2024-06-10T16:32:54Z")

</div>

Hi guys,

I need to ask, if I clear the DDoS Entries in the A10 device, this is going to affect the production evironment?

Thanks

---

<div class="post-metadata">

**Author:** ![mdunn](https://avatars.discourse-cdn.com/v4/letter/m/87869e/32.png) [@mdunn](https://community.a10networks.com/u/mdunn)\
**Post date:** [June 11, 2024, 2:47pm UTC](https://community.a10networks.com/t/clear-ddos-entries/854/2 "2024-06-11T14:47:41Z")

</div>

This should not negatively impact production environment, and regular traffic processing should resume for the cleared entries. Use the clear commands to delete L3 and L4 DDoS entries. The clear command provides  
options to selectively remove some entries or all DDoS entries can be cleared entirely.  
L3 DDoS entries can be cleared based on a NAT IP netmask or NAT Pool. L4 DDoS entries can be  
cleared based on a NAT IP netmask, port, protocol, or based on NAT pool.