error after upgrade ADC to ACOS 5.2.0
eromerou
Member ✭
After of upgrade from 4.1.1P13 to 5.2.0 firmware version, i have the follow errors and the device seems to reload ( conmute to slave node ), with previous version don't have issues
Oct 06 2020 16:10:11 Error [Fail Safe]:Failed in thread LWP 12227
Oct 06 2020 16:10:11 Error [Fail Safe]:Failed in thread LWP 12609
Oct 06 2020 16:10:11 Error [Fail Safe]:Failed in thread LWP 12263
Oct 06 2020 16:10:11 Error [Fail Safe]:Failed in thread LWP 12265
Oct 06 2020 16:10:11 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was -1031673105 at time 4295771352 bit 4).
Oct 06 2020 16:10:10 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was -1031673105 at time 4295771273 bit 4).
Oct 06 2020 16:10:10 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was -1031673105 at time 4295771197 bit 4).
Oct 06 2020 16:10:10 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was -1031673105 at time 4295771121 bit 4).
Oct 06 2020 16:10:09 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was -1031673105 at time 4295771042 bit 4).
Oct 06 2020 16:08:11 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was 1830915853 at time 4295741515 bit 4).
Oct 06 2020 16:08:11 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was 1830915853 at time 4295741437 bit 4).
Oct 06 2020 16:07:48 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was 1573419837 at time 4295735766 bit 4).
Oct 06 2020 16:07:48 Warning [AXMON]:Detected problem in Health Monitor DataCPU3 (LWP 12229). (Last counter was 1573419837 at time 4295735683 bit 4).
Oct 06 2020 15:53:44 Error [Fail Safe]:Failed in thread LWP 10322
Oct 06 2020 15:53:44 Error [Fail Safe]:Failed in thread LWP 10323
Oct 06 2020 15:53:44 Error [Fail Safe]:Failed in thread LWP 10327
Oct 06 2020 15:53:44 Error [Fail Safe]:Failed in thread LWP 10324
Oct 06 2020 15:53:44 Error [Fail Safe]:Failed in thread LWP 10693
Oct 06 2020 15:53:44 Error [Fail Safe]:Failed in thread LWP 10357
Oct 06 2020 15:53:44 Error [Fail Safe]:Failed in thread LWP 10359
Comments
May have to engage TAC on that one... What platform are you running?
TH1030 Non FTA,
I've back to 4.1.1, we have about 8 reset (vcs cluster mode) in 12 hours with this firmaware, now are stable and running.
I know that the 1040 requires upgrading to 4.1.4-GR1-P3 prior to loading 5.x code, but the same was not explicitly said for the 1030. It may be worth a try, though.
Only the 1030S is supported on v5.2.....if you just have the 1030 model, it may or may not work.
https://documentation.a10networks.com/ACOS/520x/ACOS_5_2_0/pdf/A10_5.2.0_RN.pdf Page 171
errata, is a 1030S
TH1030S 4.1.1-P13 build 27