[T&C] Example of using SNI with aFleX

siddharthaa

In an SSL/TLS handshake, the name of the server being accessed is sent using the SNI extension in the Client Hello message.

For example, suppose you access the site https://intranet.a10tests.com, it will show up in the SNI extension as follows:

Starting from ACOS 5.1.0, this SNI field can be captured using the aFleX command: SSL::hostname

To do so, login into the Thunder device GUI and navigate to:

ADC > aFleX

Then click on “Create” to create a new aFleX script:

The script is as follows:

when CLIENTSSL_HANDSHAKE {
   log "SSL SNI is [SSL::hostname]"
}

Click on “Create” to create the script.

Now you can apply this script to a virtual port, say port 443 of a VIP.

To do so using GUI, navigate to:

ADC > SLB > Virtual Servers > VIP1 > Virtual Port > Update

Then specify the name of the aFleX script (e.g. log_sni) under the Advanced Fields section:

Click on “Update” to make the new changes take effect.

On CLI, the configuration will look as follows:

slb virtual-server VIP1 100.64.1.250 
 port 443 https 
   aflex log_sni 
   service-group Server_HTTP 
   template client-ssl a10tests.com

Now, when a client tries to access the site https://intranet.a10tests.com it will be logged as:

CFW(config)#sh log
Log Buffer: 30000
Nov 03 2020 23:31:00 Info       [AFLEX]:log_sni:SSL SNI is intranet.a10tests.com

This can be useful if you have multiple HTTPS sites corresponding to the same VIP and want to be able to log each of them individually. 

In addition to the SNI field, you can also collect additional information such as SSL/TLS cipher name, cipher bits, and cipher version. Here is the aFleX script to do so:

  when CLIENTSSL_HANDSHAKE {
   log "SSL cipher_name is [SSL::cipher name]"
   log "SSL cipher_bit is [SSL::cipher bits]"
   log "SSL cipher_version is [SSL::cipher version]"
   log "SSL SNI is [SSL::hostname]"
}